What does the letter at the beginning of a tire code represent?
Table of Contents
What does the letter at the beginning of a tire code represent?
Also known as the service description, the number indicates the maximum load the tire can support when inflated properly, and the letter represents the maximum speed capability of the tire.
How do I clear the error code on my LG dryer?
Reset the Control Panel
- Power the dryer OFF and unplug it from the electrical outlet (You can also trip the circuit breaker if that’s easier).
- Press and hold the START/PAUSE key for 5 seconds while the unit is without power.
- Turn the breaker back on, and power on the unit.
What does each number mean on tire size?
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65\% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
How do I clear the error code on my Samsung dryer?
Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
What does 90W mean on a tire?
P 245/55R18 90W. The load index refers to the amount of weight a tire can support. As the load index increases, the maximum weight increases accordingly. Typical passenger vehicle tires have a load index of 70 to 110 (761-2,337 pounds.). With a load index of 90, this tire can support 1,323 pounds.
How do you read a tire code?
The last four digits of this code tell you when your tire was manufactured. The first two numbers indicate what week of the year it was made (out of 52 weeks per year), and the second two numbers represent the year. For example, 5200 would reveal that a tire was manufactured during the 52nd week of the year 2000.
How do you clear a dryer error code?
To remove the error code and get your dryer working again, you need to: Clean out the lint filter. Once the lint filter is cleaned, disconnect the exhaust hose (it’s at the back of the dryer), and check to see it is blocked up. If you find a blockage, remove the loose debris from the hose.
What are the codes on a Samsung dryer?
Error Codes Explained
| Fault Code | Clothes Dryer Problem |
|---|---|
| dF | Door circuit failure |
| Od | Excessive drying time |
| FE | Problem with power supply |
| tS or tO | Defective temperature sensor (electrically shorted or electrically open) |