What is the role of MFI in quality control?
Table of Contents
What is the role of MFI in quality control?
The role of MFI is very prominent in the quality control of the plastic materials and products. The melt flow index test of the material also helps the manufacturers of plastic resins to introduce necessary changes in the manufacturing process to ensure the best quality of the material.
What is the relationship between melt index and molecular weight?
The higher the melt index of the material the lower the average molecular weight of the polymer. If you ask a processor what type of PE they are running, a typical response will be, “I’m running a 7-melt, 953 material.” Translation: a material with a nominal melt index of 7 g/10 min.
What is difference between MFI and MFR?
Melt flow index (MFI) or Melt Flow Rate (MFR) is a measure of a given polymers’ flow characteristics also known as the Rheological properties in the molten state under a known applied pressure….Hygroscopic Polymers.
| Hygroscopic | Non-Hygroscopic |
|---|---|
| PC | Polystyrene |
| PMMA | |
| Polyurethane |
How is MFI calculated?
The Money Flow Index requires a series of calculations. The Money Ratio is then calculated by dividing the Positive Money Flow by the Negative Money Flow. Money Ratio = Positive Money Flow / Negative Money Flow. Finally, the Money Flow Index is calculated using the Money Ratio.
What is the melt flow index of polyethylene?
3.3. 1 Melt Flow Index
| Plastic/Polymer | ASTM Standard Conditions (°C/kg) |
|---|---|
| Polyethylene (PE) | 125/0.325, 125/2.16, 250/1.2, 190/0.325, 190/2.16, 190/21.60, 190/10, 310/12.5 |
| Polycarbonate (PC) | 300/1.2 |
| Polypropylene (PP) | 230/2.16 |
| Polyphenyl sulfone (PPSU) | 365/5.0, 380/2.16 |
What is melt index in polyethylene?
The Melt Flow Index (MFI) is a measure of the ease of flow of the melt of a thermoplastic polymer. Melt flow rate is very commonly used for polyolefins, polyethylene being measured at 190 °C and polypropylene at 230 °C.
What is the MFI of polyethylene?
What is MFI?
The Money Flow Index (MFI) is a momentum indicator that measures the flow of money into and out of a security over a specified period of time.
What is the difference between melt flow rate and melt index?
The Melt Flow Index (MFI) is a measure of the ease of flow of the melt of a thermoplastic polymer. Melt flow rate is inversely proportional to viscosity of the melt at the conditions of the test, though it should be borne in mind that the viscosity for any such material depends on the applied force.
What is MFI in HDPE?