How wide should MTB handle bars be?
Table of Contents
How wide should MTB handle bars be?
I would say the most common handlebar width is about 780mm wide. Now, most modern handlebars either come at 800mm wide or 780mm wide, so you might have to cut a little bit off, but they are designed to do that. You often have a bar with cut lines that already tell you where to cut down in 5mm increments on each side.
Is handlebar too wide?
Notice the high elbows and shrugged shoulders? If you are most comfortable on your bars in this position, it’s quite possible they are too wide. Also notice the positioning of his elbows: They’re closer to the level of the bar instead of closer to the level of the shoulder.
Are wider handlebars more comfortable?
Wide handlebars also have their place, and some riders and bikes are better with them. If your handlebars are too narrow, your shoulders feel strained when riding in this position. Bars that are wider than your shoulders feel more natural if you ride with your elbows locked.
What does a shorter stem do on a MTB?
Using a shorter stem gives the bike quicker handling characteristics and a more responsive feel. A longer stem shifts your body weight towards the front of the bike and puts you in a better pedaling position, especially on those steep climbs.
Should I cut my MTB handlebars?
Don’t be afraid to cut your bars down to get the right width perfect for you. Most handlebars nowadays come very wide and there is plenty of extra room to cut them down to size. Just make sure you are using the right tools.
How wide should my handle bars be?
The standard fitting advice is to get a handlebar as wide as the measurement between your AC joints. Those are the bumps atop your shoulders where the collarbone attaches just inboard of your deltoid muscle. But many riders prefer a handlebar slightly wider than their shoulders. A wide bar opens the chest.
How high should MTB bars be?
The old rule of thumb that your handlebars should be level with your seat (at full climbing height) to 3 inches below your seat (at full climbing height) is a great place to start. In general, the taller you are the more drop from seat-height to bar-height you will have.
Why are bike handlebars so wide?
The main feature of a wider bar is the increased leverage it gives riders. This means steering inputs require less force, but you need greater movement when driving. It also makes it easier to resist trail feedback. All of this conspires to give you much more control over the bike.
What width handlebars do pros use?
Some sprinters like Dehaes often use narrower bars, but in the 38-40cm range. Most riders have 40-42cm bars in the pro peloton.