How do you reset a combination lock?

How do I reset my padlock?

1. Pull up the shackle to open the lock.
2. Rotate the shackle 90° counterclockwise and press all the way down.
3. Hold down the shackle and set your own combination by turning dials.
4. Turn the shackle back as normal. The setting is now complete.

How do you change a combination lock number?

How to Set a Combination Lock

1. Pull up the shackle to unlock.
2. Rotate the shackle 90 degrees counterclockwise and press down.
3. Hold down and continue to turn the counterclockwise another 90 degrees.
4. Set your own combination by turning the dials.
5. Turn the shackle back as normal then the setting is complete.

Can you reset the combination on a combination lock?

Resettable combination locks have a combination that is assigned by the owner of the lock. Therefore, Master Lock does not have record of the combination that the owner set. The lock cannot be reset unless it is in the open position. If your lock is attached to something, you will need to call a locksmith for removal.

How do you reset a combination lock without the code?

Spin the dial clockwise a few times to reset the lock and set it at 0. Apply upwards pressure on the shackle and turn the dial clockwise. The lock will catch several times, allowing for slight movement back and forth between two numbers.

How do you change the code on a master lock box?

The Master 5401 comes factory-set to 0000. To change the code, input your 0000 and open the unit up. To change the combination, push the Reset button across and up. Now select any 4-digit code of your choice.

How do you change the combination on a Master Lock?

Changing a Precision Dial Lock Open the lock using the old combination. Insert the reset tool into the shackle hole. Turn the reset tool so that the Master logo is facing you. Rotate the dial clockwise 3 times to clear the old combination. Enter your new combination. Remove the reset tool to lock it. Write down the combination in a safe place.

How do I change the code on a combination padlock?

To change the code on a combination padlock, turn the top half 180 degrees to the left, press down until it clicks, turn the dial to set the new combination, turn the top half of the lock 180 degrees to the right and close the lock.

How do you change the combination on a dial lock?

Rotate the dial to the left counterclockwise so that the first number of your old combination stops on you lock’s “change” position–either 11 o’clock or 1 o’clock on the dial. Dial the first number of your combination by turning the dial to the left, going counter-clockwise.

How to change combination on Master padlock?

Open the lock using the previous combination. If it is a new lock,you can use the factory-set combination to open the lock.

Insert the reset tool in the hole on the side of the lock.

Push the reset tool in and turn 90° in either direction.

Set wheels to your new combination.

Turn and remove the reset tool.

Record your combination in a safe place.