Popular

Can I use 2N3904 instead of 2N2222?

Can I use 2N3904 instead of 2N2222?

Usually a 2N3904 will suffice for most circuits, but if you need more than 200mA, then you should use a 2N2222 instead….2N3904 vs 2N2222.

2N3904 2N2222
Type of BJT NPN NPN
Maximum current that the transistor can handle from the emitter to the collector (called collector current, Ic) 200mA 1A

Can I use 2N2222A instead of 2N2222?

They are same and are used interchangebly most of the times. 2N2222 is metallic package TO-18 and pn2222 is a plastic package TO-92,you can refer the datasheet of them.

Can I use bc548 instead of 2N2222?

Can I use a BC547 transistor instead of a 2N2222A transistor? – Quora. Yes, you can use, for switching just look for Ic(collector current) and Vceo(collector-emitter voltage) in the datasheet.

READ ALSO:   What is resource leveling in project management?

What is the difference between 2N2222 and BC547?

The 2N2222A transistor is very much similar to the commonly used NPN transistor BC547. But there are two important features that distinguish both. 2N2222A can allow collector current upto 800mA and also has power dissipation of 652mW which can be used to drive larger loads than compared with BC547.

What is the difference between 2N2222 and 2N3904?

2N3904 can handle up to 200mA (milliamperes) of current flowing from the emitter to the collector terminal. A 2N2222 can handle up to 5 times that amount of current, as it can handle up to 1A (amps) of current flow from emitter to collector to power a load.

What is the use of 2N2222 transistor?

The 2N2222 is a common NPN bipolar junction transistor (BJT) used for general purpose low-power amplifying or switching applications. It is designed for low to medium current, low power, medium voltage, and can operate at moderately high speeds.

READ ALSO:   What is the max mod capacity in Warframe?

Can 2N2222 replace BC547?

Yes, 2N2222 will work fine.

What is NPN transistor 2N2222?

The 2N2222 is a common NPN bipolar junction transistor (BJT) used for general purpose low-power amplifying or switching applications. It is designed for low to medium current, low power, medium voltage, and can operate at moderately high speeds. It was originally made in the TO-18 metal can as shown in the picture.