How do you break in parade boots?

The Wet Method: How to Break in Boots Fast

1. Put your boots in a bathtub or wash tub.
2. Fill them with water until they’re completely soaked.
3. Empty the water from your boots.
4. Put on two pair of socks and put on the wet boots.
5. Wear your boots for a full day.
6. Remove the insoles and lay them out separately to dry.

How do you spit shine police boots?

Spit-Shine One technique is to apply a thick coat of polish to the entire boot using a small polish brush. Allow 15 minutes for the coat to dry, then brush off excess polish with a horsehair brush, which will leave a thin film remaining on the boots.

How long does a shoe mirror shine last?

But if you’ve created a nice mirror shine, just a little bit of maintenance can renew it to an above average shine if not back to its original glory with just a little bit of work and so, you know, you can get two, three, maybe even four weeks of occasional wear out of a nice mirror shine.

How do you keep shoe polish from rubbing off?

Seal dye for shoes Good news – using Vaseline to seal dye is very simple. Apply a generous amount of Vaseline onto a cloth and rub the inside of the shoes, focusing on the areas that tend to fade most. Let the Vaseline act for at least 24 hours and then remove the excess product with a clean cloth.

How can I make my shoes shiny?

Take a drop of water and hard wax on the cloth, then polish your shoes gently. The part you apply wax to first turns white, but soon starts to shine! The water spreads the wax coating and makes the shoe shine. Put water and hard wax on the cloth and polish.

How do you get Army boots to shine like a mirror?

Mirror shine steps

1. Prepare the shoes or boots.
2. Clean your shoes / boots.
3. Apply leather conditioner and cream polish if required.
4. Apply a thick base coat to fill in and level the uneven surface.
5. Build more base coats over the toe caps until leather grain fades.
6. Water shine / “spit-shine” the toe caps.
7. An aficionado’s trick.