How far does a light switch need to be away from a shower?

Switches shall not be installed within wet locations in tub or shower spaces unless installed as part of a listed tub or shower assembly. {NOTE: According to both the NEC and the IRC a damp/wet location is in the area within 36 inches of either edge of a tub sink or basin and/or an area that is subject to “spray”.

How close can a light switch be to a shower Ontario?

Switches shall not be installed within wet locations in tub or shower spaces, unless installed as part of a listed tub or shower assembly. Previous versions of the Canadian Electrical Code defined it as “within reach” rather than 1 m.

How close can a light switch be to a bathroom sink?

Every bathroom needs at least one electrical outlet. It must be within 3 feet of the sink edge. Across from the sink on an opposite wall is not acceptable, either behind or beside the sink. There must be an electrical receptacle within 3 feet of the two sinks in the bathroom.

Can you have a switch next to a shower?

The NEC requires that switches not be installed within the confines of shower and tub areas, unless as part of a shower assembly. In other words, unless the switch is already built in to your shower assembly from the manufacturer, adding a switch inside a shower is a code violation.

Can you have a light switch in a shower room?

For light switches, plate switches can be used on the inside of the bathroom, but these must be suitable for use in the bathroom, given the high levels of humidity and condensation. And they also must be at least 0.6m away from the bath or shower. A pull cord can be used instead, in any location in the bathroom.

Is it legal to have a light switch in a bathroom?

Light switches are not allowed in bathrooms it has to be a pull cord or a switch outside. Radiator pipes do not have to be bonded IF boiler is cross bonded and/or you have rcd protection on the fuseboard. Also a isolator for fan outside of bathroom is required.

How far into a room can a light switch be?

between 15 and 48 inches
However there is a legal requirement in place – it is dictated by the American Disabilities Association. This states that all light switches must be placed between 15 and 48 inches from the floor to ensure that wheelchair users can reach them.

How far should a light switch be from a sink?

Every bathroom must have at least one electrical outlet. It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.

Can you put a light switch near a shower?

Why switches are not allowed to install in bathroom?

Bathrooms are considered to be a special location for electrical installations because they have an increased risk of electric shock for the users, due to being so close to water.

Can you put a shower switch in a bathroom?

Switches are now allowed in bathrooms as long as outside all zones (zones 0,1,2). Zones extend to 0.6mtrs from edge of bath/shower. If working to these regs, it has to be noted that RCD protection would also be required. sometimes bathrooms can be a bit tight for space and leave no suitable space to fit the isolator.

What is the min/max distance for switches and outlets near a bathtub?

You should keep the receptacle at least 6 feet away from the edge of a bathtub or shower and at least 1 foot away from sinks.