How do you connect a wireless router to a cable modem?

To connect a router to your computer with a wireless connection:

1. Plug one end of an Ethernet cable into your modem.
2. Plug the other end of the Ethernet cable into the Internet, Uplink, WAN or WLAN port on your router.
3. Plug in your router and allow at least 2 to 3 minutes for it light up.

Can you connect a WIFI router to a cable modem router?

Plug one end of an Ethernet cable into the new router’s WAN/uplink port, then plug the other end into any free port on the first router other than its uplink port. You can connect two routers wirelessly, but the second router will only function as a wireless access point. Can I use a router without a modem? Yes.

What cable do I use to connect modem to router?

Connect your router to your modem using an Ethernet cable. Most routers have multiple Ethernet ports, but there’s one specifically labeled “Internet” or “WAN” (wide area network) used for connecting directly to the modem.

Does it matter which Ethernet port I use on my modem?

It does not make any difference what port you use to connect to the internet. It does not make any difference what port you use to connect to the internet. Your smart devices will connect to the internet through the switch. All smart devices would need an ethernet connection.

How do I set up a new router?

How to Install a New Router

1. Check Your Internet Connection.
2. Place the Router.
3. Connect to Power.
4. Connect to Your Internet Source.
5. Access the Router’s Web Interface.
6. Connect Wired Devices.
7. Connect Your PC or Device to Wi-Fi.

Why are there 2 Ethernet ports on my modem?

Your specific cable modem does not include a routing function, so you can only connect one device to it (usually a router). The only reason that this modem has two Ethernet ports is to support link aggregation, providing 2 Gbps to a router.

Does the router have to be connected to cable?

Instead of plugging the modem directly into your computer, you’ll plug it into the router with an Ethernet cable. You still need to plug in an Ethernet cable. Even if you’re setting up a Wi-Fi network, you’ll still need to plug your computer into the router with an Ethernet cable.

Does my router need to be connected to cable?

Routers bring the Internet to your devices The router connects to your modem and then to your devices (laptops, smart TVs, printers, etc.) via either an Ethernet cable or, in the case of a wireless router, WiFi signal. However, a router doesn’t need to connect to a modem to function.