How do I convert stereo speakers to my computer speakers?

In This Article

1. Turn down the volume on your stereo and sound card.
2. Find the correct cable.
3. Plug the 1/8-inch stereo plug into your sound card’s speaker jack.
4. Plug the cable’s two RCA phono plugs into the stereo’s Aux Input or Tape Input jacks.
5. Turn on the stereo, and switch it to Aux Input or Tape Input.

Can you put computer speakers in a car?

In order to run PC speakers in the car, you’ll need probably at LEAST a 500w inverter (just as a guess). That inverter will actually DRAW around 800-1000w from your electrical system. That means you’ll need to upgrade your electrical system to handle that kind of power.

Can you use USB for speakers?

In addition, USB Audio devices can offer surround sound (5.1- or 7.1-channel sound), even if your computer lacks that option. You can buy any USB Audio-compatible module, amplifier, speaker, headphone, or microphone (examples below), and simply plug it into your computer and you’re pretty much good to go.

How do I hook up old stereo speakers to my computer?

How to Connect Old Stereo Speakers to a Computer

1. Attach the speakers to the amplifier with speaker wire, using the red wire to connect to the positive terminal and the other wire to connect with the black terminal.
2. Connect a set of RCA-type audio cables to a set of free audio input jacks on the back of the amp.

How do I convert normal speakers to USB speakers?

Plug it into any available USB port. Try to plug it directly into the computer instead of a USB port which is part of a hub. The reason for this is that USB speakers very often are bus powered, that is they draw power from the USB port.

What is USB audio device?

For music lovers, it’s always wise to choose USB audio for perfect music quality. A USB audio device is a DAC (digital-to-analog converter), or it might be speakers with the DAC built-in, to allow the audio to be decoded outside the computer. That can improve the sound compared to that produced by the computer itself.

Can you connect speakers to PC with USB?

To connect a set of USB speakers or headphones, insert the device’s USB connector into one of your computer’s open USB ports (as shown in the picture). The device should be automatically recognized by the computer.