How long does an evaporative cooler motor last?

Evaporative cooling systems were built to last a long, long time. While the average life expectancy is 15 – 20 years, there are plenty of systems in the Eastern Suburbs that last between 15 and 25 years old.

How much does a swamp cooler motor cost?

Swamp Cooler Motor Replacement A motor replacement costs anywhere from $50 to $600.

Why did my swamp cooler stopped working?

Faulty Wiring But if the cooler is still not working, then you should consider further troubleshooting. If your area has constant power surges, then the issue may be a little more complex than a tripped circuit breaker. To check this: Look for the wires that lead to the breaker and the fuse.

How long should I run the pump on my swamp cooler?

You also want to only run the pump for as long as you have water in the reservoir. Running the pump without water will overheat the pump, causing it to burn out. If you run out of water, most evaporative coolers will run the fan without water, but this is for recirculating air and won’t truly cool it.

How much does it cost to replace a swamp cooler?

The average cost to install a swamp cooler is $2,517 and ranges from $1,564 and $3,742. Labor will run about $70 an hour. Materials, or the unit itself, will cost anywhere from $40 to $2,300. A larger house will have more air to cool and will therefore require a larger unit.

How much does it cost to replace a swamp cooler pump?

The average cost to repair a swamp cooler ranges from $115-$600, with the average homeowner spending around $250including all of the materials and labor fees….Cost to Replace Parts of a Swamp Cooler.

How much is a cooler motor at Home Depot?

Compare Similar Evaporative Cooler Motors

What is the orange wire on a swamp cooler?

Typically a red wire operates the motor’s low speed and is connected to terminal “1,” a black wire operates the motor’s high speed and is connected to terminal “C” and an orange wire operates the pump and is connected to terminal “2.”

Why cooler motor is not working?

1. The unworking condition of the motor is due to the damage or failure of winding or failure of the capacitor. Check the motor whether it is working properly or not. If the grass is not wetted properly the cooler won’t provide complete cooling, then change the motor the problem will be solved immediately.

How do you know if your swamp cooler pump is bad?

What Is a Swamp Cooler?

1. Your Swamp Cooler Isn’t Starting or Has No Air Flow.
2. There Are Weird Odors Coming From The Unit.
3. The Airflow Isn’t Working Right.
4. The Swamp Cooler is Leaking.

Why does my swamp cooler stop running?

If you do not properly maintain your cooler by keeping the bearings lubricated, they will dry, make noise, and eventually cause the swamp cooler to stop running. If this is the case, you need to first try to lubricate the bearings and then possibly replace them. 2. Motor Oil The next place you can check is the motor oil.

How does a swamp cooler motor work?

As the water evaporates, the air being sucked through this matt is much more cool and humid than the air in a hot dry climate. This air is pushed by the fan into the house and cools and humidifies the air. There are several reasons why your swamp cooler motor may overheat and stop this process.

How tight should the fan belt be on a swamp cooler?

Once inside check the tension of the belt running from the swamp cooler motor to the fan. It should not be too tight or too lose. Incorrect fan belt tension could cause your swamp cooler motor to overheat. Roughly speaking there should be about 1 inch of play in the tension of your fan belt.

Why does my water cooler make a buzzing noise?

Reason 1 – Replace Bearings. If your cooler is making a buzzing sound and then stops running, one cause could be your bearings. If you do not properly maintain your cooler by keeping the bearings lubricated, they will dry, make noise and eventually cause the cooler to stop running.