Questions

Can ping device on network but Cannot connect?

Can ping device on network but Cannot connect?

This issue is typically caused by a problem with domain name server (DNS) resolution because the Internet service provider’s DNS servers are unavailable or a problem with the security software (usually a firewall) running on the computer which is attempting to access the Internet.

Can ping A to B but not B to A?

For the above to happen packets must be able to both travel from A to B, and from B to A. So the answer to your question is; NO ! If packets can travel from A to B and then back to A.

Why can’t I ping an IP address on my network?

If you are not pinging a name, you aren’t using DNS. It’s reverse DNS because you are doing the reverse of what DNS natively does, i.e. resolve a name to an IP address. But that is just a feature to help identify what you’re pinging. PING still uses the IP address to formulate its echo request.

READ ALSO:   Can I use sour cream instead of cream in a sauce?

Can ping out but not in Windows 10?

Allowing Ping through the Firewall in Windows 10 Click on Advanced Settings. Now click on the Inbound Rules as highlighted in the image shown above. Click on “Enable Rule” from these options in order to allow ping from the Firewall in Windows 10.

How do I open ICMP ports in Windows 10?

Click Customize. In the Customize ICMP Settings dialog box, do one of the following: To allow all ICMP network traffic, click All ICMP types, and then click OK. To select one of the predefined ICMP types, click Specific ICMP types, and then select each type in the list that you want to allow.

Can’t ping server but server can ping client?

1 Answer. Try to turn off the firewall and ping to test the response. If that does work, then re-enable the firewall and allow ping.

How do I know if ICMP is blocked?

Expand the Computer Configuration/Policies/Windows Settings/Security Settings/Windows Firewall with Advanced Security/Windows Firewall with Advanced Security/Inbound Rules node. From the Protocol Type: drop down list select ICMPv4 and click Customize… Check the All ICMP types radio botton and click OK.