What is the importance of engine Watchkeeping?
Table of Contents
- 1 What is the importance of engine Watchkeeping?
- 2 How do you take over watch in the engine room?
- 3 What will your duties and responsibilities in Watchkeeping?
- 4 Why is an engineering watch important?
- 5 What are the things that you must do before you take over the watch?
- 6 What is the importance of engine room rounds before taking over the watch?
- 7 What is the objective of engine room resource management?
- 8 What are the three major duties of the officer of the watch?
What is the importance of engine Watchkeeping?
Engine watch keeping is carried out in power plants and engine rooms of ships. The purpose is to monitor and rectify any problems found. In power plants and on ships lot of other machinery/equipment are running which needs to be monitored. Most modern ships have UMS (unmanned machinery space) designation.
How do you take over watch in the engine room?
Q. Describe the procedure for taking over an engine room watch.
- Check the funnel emissions.
- Check steering gear & fridge flats.
- Enter the engine room from the top.
- Check cooling water header tank.
- Check main engine cooling water returns & temperatures.
- Check piston cooling water returns & temperatures.
What are the principles of watchkeeping?
Principles to be observed in keeping a navigational watch.
- Relieving officers shall personally satisfy themselves regarding the:
- Taking over the watch.
- Relieving officer shall personally satisfy themselves regarding the:
- The officer in charge of the navigational watch shall make regular checks to ensure that:
What will your duties and responsibilities in Watchkeeping?
Should be conversant with the ship’s speed, turning circles, and ship handling characteristics. Prepare, execute, and monitor a safe passage plan. Ensure handing over of the watch is done according to shipboard operation procedures (ISM) Asking for support whenever required.
Why is an engineering watch important?
The composition of the engineering watch shall, at all times, be adequate to ensure the safe operation of all machinery affecting the operation of the ship, in either automated or manual mode, and be appropriate to the prevailing circumstances and conditions.
What are the machinery to be monitored regularly during engine room watchkeeping?
During the engine room watch, the following machineries to be monitor regularly: ME or propulsion systems functioning and all units’ exhaust temp, piston cooling lub oil outlet temp, JCW outlet temp, Lub inlet pressure & temp, Air Cooler temp, fuel temp & pressure to be maintained.
What are the things that you must do before you take over the watch?
Mentioned below are important points marine engineers must note before handling over watch at ports:
- Information about Port Regulations and Local Laws.
- Lines of Communication.
- Standing and Other Important Orders.
- Condition of Engine Room Machinery.
- Status of Repair and Maintenance Work.
- Any Special Orders of Operation.
What is the importance of engine room rounds before taking over the watch?
But! What you have to check in these morning and evening rounds is quite important. Engine room is a big place to look for. So, if you well aware of the things that you have to look for in your rounds, then it will make sure that you get lesser alarms and better running of the machinery.
What are the three watch principles of engineering watch?
Watch arrangements The composition of the engineering watch shall, at all times, be adequate to ensure the safe operation of all machinery affecting the operation of the ship, in either automated or manual mode, and be appropriate to the prevailing circumstances and conditions.
What is the objective of engine room resource management?
Engine Room Resource Management (ERM) is a system of achieving safe engineering operations by proactively managing personnel, equipment, and information. Review the team roles, human factors, and situational awareness required to implement a proper ERM program, and learn how good ERM practices save vessels.
What are the three major duties of the officer of the watch?
The three main duties of an Officer on Watch can be classified under watch-keeping, navigation and GMDSS radio watch keeping.
What watches do engineers wear?
This list is merely a selection of some of the most commonly cited watches that engineers wear.
- Casio G-Shock GW2310FB-1 is shock absorbent.
- The Rolex Milgauss is antimagnetic.
- The IWC Ingenieur, naturally…
- The Omega Speedmaster was good enough for NASA Astronauts.
- The Casio CA56-1 is a great economy calculator watch.
https://www.youtube.com/watch?v=EFexu0qIj9Y