How do you start the first row of laminate floor if the wall is not straight?

How to Start the First Row on Laminate Floor if the Wall is Not Straight

1. Step 1: Mark the Expansion Gap.
2. Step 2: Determine Out-of-Square Measurement.
3. Step 3: Begin at the Starting Wall.
4. Step 4: Mark Half of Out-of-Square Measurement.
5. Step 5: Angle and Intersect Chalk Lines.
6. Step 6: Cut Boards at Markings.

Does laminate flooring have to go wall to wall?

The installation process is very similar to installing laminate on your subfloor, however, the planks must be permanently attached to the wall so they stay in their place. Below you will find step-by-step instructions on how to install flooring on your wall.

Does it matter which direction you lay laminate flooring?

In what direction should you lay a laminate floor? In most cases, you should lay your laminate flooring parallel to the longest side of the room or your home. This will create a more natural flow and will accentuate the length of the room better.

Do you cut the tongue off the first row of laminate?

Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. If it is too short, cut a new plank in half and use one half to start the second row.

Where do you start when laying laminate flooring?

Always start hardwood flooring along the most prominent and noticeable wall in the room. This way, if the room is out of square, the crooked cut will be hidden under the cabinet’s toe kick. In order to keep the floor straight and square, start laying the laminate away from the wall because the wall may not be straight.

Can you nail laminate flooring?

Nailing laminate flooring is not recommended, but screws can be used if you approach it carefully. If you can avoid it, it’s best not to make holes in your laminate at all.