Can I use my drill press as a spindle sander?
Table of Contents
Can I use my drill press as a spindle sander?
(Rick White) “Yes, I use my drill press for both operations all the time. As a spindle sander, the drill press will also work. There are a lot of new accessories out there to mimic the action of a spindle sander on your drill press and they work fine.
Can a drill press be used for sanding?
A drill-press sanding plate will lift your workpiece above the bottom edge of your sanding drum. Without something like this, you’ll get uneven edges when you sand. Drill presses are great for drilling holes. Another (slightly more practical) use is as a makeshift spindle sander.
What are 10 things you should avoid doing when using a drill press?
What are some things you should avoid doing?
- Do not wear any loose clothing or ties.
- Do not wear gloves, rings, watches, or bracelets while working with a drill press.
- Do not set speeds, adjust, or measure work until machine is completely stopped.
- Do not force the drill with extra pressure.
What attachment is used for sanding on a drill press?
Sanding Drum and Sleeves Sanding Drums and Sleeves are some of the most useful attachments available for your drill press. They are ideal for smoothing out rough edges and cuts, sanding inner surfaces of shallow or deep drilled holes.
What can I use instead of a spindle sander?
If you’re without a dedicated spindle sander, a simple solution is to use either your drill press or router table to do the job. On a drill press, it’s possible to set the speeds much slower than on a variable speed router, but either will do the job.
Can you use a drum sander in a drill?
Introduction: Drill Press Drum Sander Turn your drill press into a drum sander by making your own spindles to hold sandpaper. This easy afternoon workshop project is great for sanding inside a concave curve, a difficult task for belt or random orbital sanders.
What should you never use in a drill press?
What are some things you should avoid doing?
- Do not wear any loose clothing or ties.
- Do not wear gloves, rings, watches, or bracelets while working with a drill press.
- Do not set speeds, adjust, or measure work until the machine is completely stopped.
- Do not force the drill with extra pressure.
What are the three important things to keep in mind when using a drill press?
Drill Press Safety Rules
- Run drill at correct RPM for diameter of drill bit and material.
- Always hold work in a vise or clamp to the drill table.
- Use a correctly ground drill bit for the material being drilled.
- Use the proper cutting fluid for the material being drilled.
- Remove chips with a brush, never by hand.
Can you put a sander attachment on a drill?
Drill Attachments for Sanding There are a few ways you can use your drill as a sander. One is by attaching a drum sander on your drill or drill-press. These attachments are versatile and come in a variety of grits and sizes and will fit you die grinder or drill or a drill press.