Is contactor same as circuit breaker?

An electronic contactor is a simple switching device, whereas the circuit breaker is a protective system. The primary function of a contactor is controlling the power. A circuit breaker does the protecting. Contactor works under normal situations.

Why would you use a contactor?

A contactor is an electrical device which is used for switching an electrical circuit on or off. These contacts are in most cases normally open and provide operating power to the load when the contactor coil is energized. Contactors are most commonly used for controlling electric motors.

What is the difference between contactor and fuse?

Switches, circuit breakers, and contactors are used to control what parts of an electrical system are energized or de-energized. Fuses are used to protect the electrical system when something goes wrong, and can isolate the faulted parts from the normal parts.

What is the difference between a contactor and a control relay?

Control Relay: It is a device through which contacts in one circuit are operated by an alteration in conditions in the same circuit or in associated circuits. Contactor: It is a device which is used for repeatedly establishing and interrupting an electric circuit under normal conditions.

What is difference between fuse and circuit breaker?

Fuses and circuit breakers are both designed to interrupt the flow of electricity. But they operate through different mechanisms. The fuse works as a piece of metal that melts down when overheated. While a circuit breaker works by operating a switching mechanism when an overflow of electricity is detected.

How many terminals does a contactor have?

On the front of the contactor, you’ll see two wire terminals of A1 and A2. This is where we can connect a 24-volt DC power to the coil to energize it. The A1 wire terminal is where the 24-volt DC positive signal wire gets connected and the A2 wire terminal is where the 24-volt DC negative signal wire gets connected.