How do you lower the pH of homemade soap?

Using additives such as powdered goat’s milk, flaxseed oil, olive oil, or sunflower oil will also help lower the pH level. But, the most important magic tip is to add citric acid. It’s one trick you can use from commercial soap makers. It is more effective if you add it after boiling lye and oil together.

Does citric acid lower pH in soap?

If you add citric acid to the lye solution at the beginning of your soap making process, it will not lower the pH of your soap. By adding citric acid to your soap at the end of the process, be it hot process or liquid soap, the citric acid may free some of the fatty acids and again, which again, increases the superfat.

What pH is too high for soap?

Cold process soap is naturally alkaline with a pH of around 9-10. This pH helps to gently clean the skin. Sodium hydroxide lye has a pH of about 14, putting it at the very top of the pH scale. When too much lye is used in the soap, the pH level will rise from the normal level of 9-10, and can become closer to 11-14.

How do you neutralize soap?

To neutralize liquid soap made using a Failor recipe:

1. Make either a 20\% boric acid solution or a 33\% borax (20 Mule Team) solution.
2. For the boric acid solution, take 8 oz. of boiling water and add 2 oz.
3. Add about 3/4 oz.
4. Slowly pour the neutralizer into the re-heated soap mixture and stir well.

How do you neutralize liquid soap?

Can you use lemon juice in soap making?

I don’t recommend adding lemon juice to a melt and pour soap. The base can only accept so much liquid, especially, non-oil types. Lemon essential oil is best. Zest as I’ve used in this recipe is also fine, as it is mostly solid with some oils in the rind.

Can I use lemon zest in soap?

Lemon Soap is a refreshing way to start any morning and this easy lemon soap recipe, with the zest of a lemon rind, is a great way to make your own glycerin soap bars at home. This is a melt and pour soap recipe, so no lye is needed.

What soaps are pH balanced?

The pH of Common Bar Soaps

Does vinegar break down soap?

For tougher soap scum build up, you can also try making a paste out of baking soda and vinegar. Let the paste sit on the stain and then scrub. The acidity in the vinegar will help break down the scum.

Does vinegar cancel out soap?

When combined, vinegar (an acid) and castile soap (a base) cancel each other and create unsaponified soap. This reaction reduces the soap back to its original oils. If you try mixing the two ingredients you’ll immediately notice the castile soap curdles and feels very oily.