How many channel amp do I need for 6 speakers?

Yes, a 4 channel amp can easily power 6 speakers.

How many amps does a 2000 watt speaker draw?

For example, a 2000W RMS amplifier will potentially draw up to 240 amps of current depending on the design and efficiency of the amplifier.

Can you wire 6 speakers to a 4 channel amp?

You can wire a 4 channel amp to 6 speakers in many ways. When you wire more speakers with an amp than the capacity, it increases load. An increase in load makes your amp hot that is not good for your amplifier. You can connect 6 speakers to 4 channel amp either in series or parallel.

How do I connect 6 speakers to a 4 channel amp?

Wiring Parallel – 4 Channel Amp to 6 Speakers When you connect 2 speakers on 1 channel, you connect 4 speakers on 2 channels. The 4 speakers are wired on 2 channels, and you can connect the remaining 2 speakers on the other 2 channels. That means you have connected 6 speakers on 4 channels.

Can I connect a 4 ohm speaker to an 8 ohm amplifier?

For example, connecting a 4 ohm speaker to an amplifier that is labeled as working with 8 ohm speakers would mean it would have to produce double the electrical current to the speaker! Image of the rear of a home stereo receiver/amplifier.

What is the net impedance of two 8 ohm speakers?

Two 8 ohm speakers wired in parallel will have a net impedance of (8 divided by 2) 4 ohms. If you have three speakers, each at 8ohms, divide 8 by three to get a total impedance of 2.66ohms. If the speakers do not have a common impedance, you can use formula 1 for two speakers or formula 2 for more than two speakers.

Can you hook up 16 and 8 ohms together?

Case 3: the exotic combination of 16 and 8 ohms together, and how to hook them up together… Almost every gigging guitarist will have experienced this before: you’ve got one cab with 8 ohms, and one with 16 – and you want to connect them both to a speaker output at the same time.

What is the difference between 8ohms and 4ohms speakers?

Parallel Connections: Speaker A=8ohms and speaker B=4ohms. A total of 50 watts is delivered to the circuit. The 8ohms speaker will be asked to dissipate about 16 watts, while the 4ohm speaker will need to dissipate only 33 watts or so. In this case speaker B is being ask to dissipate more watts than it is rated to do.

https://www.youtube.com/watch?v=tMAO9LPsups