What does BC107 mean?
Table of Contents
What does BC107 mean?
BC107 is an NPN bipolar planner low power transistor which is mainly designed for general purpose switching and amplification purpose. It is mainly composed of three terminals named as an emitter, base, and collector.
What do the numbers mean on a transistor?
Its format for transistors is two letters followed by a serial number. The first letter represents the material. For instance, A means germanium and B means silicon. The second letter refers to transistor type. For instance, C means small signal and D means power.
What are specifications of transistors?
Transistor specification parameters
- Type number: The type number of the device is a unique identifier given to each type of transistor.
- Polarity: There are two types of transistor: NPN transistors and PNP transistors.
What is a BC108 transistor?
BC108 is a generic semiconductor device that can be used to amplify or switch signals or power.
What type of transistor is BC108?
silicon NPN bipolar junction transistors
The BC107, BC108 and BC109 are general-purpose low power silicon NPN bipolar junction transistors found very often in equipment and electronics books/articles from Europe, Australia and many other countries from the 1960s. They were created by Philips and Mullard in 1963 and introduced in April 1966.
What type of transistor is BC107?
NPN transistors
The BC107 and BC107B are silicon planar epitaxial NPN transistors in TO-18 metal case. They are suitable for use in driver stages, low noise input stages and signal processing circuits of television receivers. The PNP complementary types are BC177 and BC177B respectively.
What are specifications of diodes?
Example of typical diode specifications
| Typical 1N5711 Characteristics / Specifications | ||
|---|---|---|
| Characteristic | Typical Value | Unit |
| Reverse leakage current, IR | 200 | µA |
| Forward voltage drop, VF | 0.41 1.00 | V |
| Junction capacitance, Cj | 2.0 | pF |
What do the numbers on diodes mean?
The most common rectifier diodes are identified by the model numbers 1N4001 through 1N4007. These diodes can pass currents of up to 1 A, and they have peak inverse voltage (PIV) ratings that range from 50 to 1,000 V.
How do you specify a transistor?
So below are some of the important parameters to keep in mind while selecting a transistor.
- Type number.
- Current Gain (β)
- Collector-Emitter Voltage (VCEO)
- Emitter-Base Voltage (VEBO)
- Collector-Base Voltage (VCBO)
- Collector current (IC)
- Total Power Dissipation (Ptot)
What are the voltages for BC107 and BC108?
Collector-Emitter Voltage VCEOIC = 2mA, IB = 0 BC107 45 V BC108/109 20 V Emitter-Base Voltage VEBO IE = 10uA, IC = 0 BC107 6.0 V BC108/109 5.0 V Collector-Cut off Current ICBOVCB = 45V, IE = 0 BC107 15 nA VCB = 25V, IE = 0 BC108/109 15 nA Tamb = 125°C VCB = 45V, IE = 0 BC107 4.0 uA VCB = 25V, IE = 0 BC108/109 4.0 uA
What is BC107 low noise amplifier?
BC107 BC108 LOW NOISE GENERAL PURPOSE AUDIO AMPLIFIERS DESCRIPTION The BC107 and BC108 are silicon planar epitaxial NPN transistors in TO-18 metal case. They are suitable for use in driver stages, low noise input stages and signal processing circuits of television reveivers.
What are the maximum and minimum dimensions of a low power transistor?
Dimension Minimum Maximum A 5.24 5.84 B 4.52 4.97 C 4.31 5.33 D 0.40 0.53 E-0.76 F-1.27 G-2.97 H 0.91 1.17 J 0.71 1.21 K 12.70- L 45° BC107/ BC108/ BC109 Low Power Bipolar Transistors Page 2 30/05/05 V1.0 Absolute Maximum Ratings Electrical Characteristics (Ta= 25°C Unless Otherwise Specified) DESCRIPTION SYMBOL BC107 BC108 BC109 UNIT
What is the PNP number for BC107?
The PNP complemet forBC107 is BC177.TO-18INTERNAL SCHEMATIC DIAGRAMABSOLUTE MAXIMUM RATINGSSymbol Param