What happens when you put bleach on hardwood floors?
Table of Contents
What happens when you put bleach on hardwood floors?
It’s not safe to clean hardwood floors with bleach because bleach can break down the wood’s finish and seep into the porous fibers causing discoloration and weakening the structure of the floorboards. Under certain conditions, you can get away with cleaning hardwood floors with a heavily diluted bleach solution.
What can I use to disinfect my hardwood floors?
For deep cleaning and disinfecting wood floors, you should give the surface a more thorough clean every 1-2 weeks. To disinfect your floor, use Lysol® Clean & Fresh Multi-Surface Cleaner at full-strength (or dilute 1 oz to 5 oz of warm water in a bucket) and be sure to pre-clean the surface.
Can bleach mess up wood?
The use of bleach can cause several types of discolorations on both bare and finished wood. If the wood is bare, any discolorations that may appear can usually be corrected either chemically or by physically removing the discolored wood.
How do you disinfect hardwood floors with bleach?
Answer
- Mix up a solution of ¾ cup bleach added to 1 gallon of water.
- Wipe or wash the floor, and then apply the bleach solution, letting it stand for 5 minutes.
- Rinse well and air dry.
Does Clorox damage wood?
DO know your bleaches. Common laundry bleach or chlorine will effectively remove stain or dye color from wood, but will not affect the wood’s natural color. Combined, they cause a chemical reaction that creates bleach that will blanch the stain color and can also alter the color of the wood itself.
Can I use Clorox wipes on hardwood floors?
For small spills, try Clorox® Disinfecting Wipes. They even work on wood floors! For a deeper clean, vacuum or sweep the floor before mopping to remove the excess dirt, crumbs and other floor-dwelling particles.
Can I clean my floors with bleach?
When it’s time to clean your floors, mix up a bleach and water solution, and let the power of Clorox get to work. Bleach works great on vinyl, non-porous tile and even grout. It’s as simple as mixing up bleach and water, mopping it on, rinsing it off and letting everything air dry.