What protocol does a router use?

Router protocols include: Routing Information Protocol (RIP) Interior Gateway Protocol (IGRP) Open Shortest Path First (OSPF) Exterior Gateway Protocol (EGP)

What protocols are used on a LAN?

Typically when using the word “LAN” to describe a protocol, the intent is to describe lower level, or physical, layers. Some of the most common LAN protocols are “Ethernet,” “Token Ring” and “Fiber Distributed Data Interface,” or “FDDI.” “Ethernet” is by far the most common type of LAN protocol.

What are the protocol that operates on WAN?

The key WAN protocols that are in use are Asynchronous Transfer Mode (ATM), Broadband Access, Frame Relay, Point-to-Point Protocol (PPP), Synchronous Optical Network (SONET), Synchronous Digital Hierarchy (SDH), X.

How do LAN and WAN connect?

A WAN differs from a LAN because it is not restricted by geographic location. As opposed to a LAN which connects local devices to each other, a WAN connects LANs to each other, usually across multiple locations as well as individual devices that connect from a remote distance.

What are the two types of routing protocols?

The Internet is based on the AS concept; therefore, two types of routing protocols are required:

• Interior Gateway Protocols (IGP): Used for routing within an AS. It is also referred to as intra-AS routing.
• Exterior Gateway Protocols (EGP): Used for routing between autonomous systems.

Which LAN protocol is most popular?

Ethernet is most widely used local area network protocol.

Ethernet is most widely used LAN Technology, which is defined under IEEE standards 802.3.

Ethernet is the most widely installed local area network (LAN) technology.

In case you had different LAN interfaces on your system then they could have meant different. …

How does LAN relate to network standards and protocols?

LAN Standards and Protocols Each network has its own rules and standards. Therefore, protocols are use in network technology to govern the communication between network and network. There are many different kinds of protocols, the most common protocol used in the OSI data link layer in LAN are Ethernet and Token Ring.

What is PPP protocol in networking?

Point-to-Point Protocol (PPP) is a TCP/IP protocol that is used to connect one computer system to another. Computers use PPP to communicate over the telephone network or the Internet. A PPP connection exists when two systems physically connect through a telephone line. You can use PPP to connect one system to another.

What is LAN and WAN in router?

Simply stated, when you connect to a wireless router with a computer or smartphone, it becomes part of the LAN. Everything outside of this LAN — basically the entire Internet — is the WAN. LAN stands for local area network, and WAN stands for wide area network.