What size lift should I get?

Depending on how big your truck is, a six-inch lift is the only way to go. While smaller trucks shouldn’t be lifted too much, it would be a shame not to let larger vehicles show off a larger lift. If you want 35″ tires, a 6-inch lift is the perfect amount of lift to accommodate them.

How do I know what size lift I need for my truck?

Look at the front crossmembers for the lower control arms. Measure the distance from a lower control arm bolt to the factory control arm mounting hole above it. If your kit uses blocks in the rear instead of leaf springs, measure the size of the block. The rear of most kits will be 2-3 inches less lift than the front.

How do I know which lift kit to buy?

Starts here6:03How to Choose the RIGHT Lift Kit – YouTubeYouTubeStart of suggested clipEnd of suggested clip59 second suggested clipAnywhere from a stock height application to zero kit. To three inches roughly. Again depending onMoreAnywhere from a stock height application to zero kit. To three inches roughly. Again depending on your application. So this is more designed for the guys that are like.

What is a good lift kit height?

There are several heights to choose from, ranging between 1.5 to 6 inches. The higher you go, the more expensive the lift will be because it will require more work to install. Choose the best lift kit for your needs. If you will only take the vehicle off-road once in a while, a 1.5-inch lift kit may be all you need.

How big of a lift do I need for 37 inch tires?

3.5″
37″ Tires. To run these tires, you’ll need a lift kit of 3.5″ or more. This kit will have the same contents as the 2.5″ kits with the exception of control arms top and bottom for both front and rear. These kits are for serious off-roaders.

How much do I need to lift my truck to fit 35?

For a 35s tire, you need a lift of at least 2.5 inches for proper clearance and at most a lift of about 3.5 inches, though these depend on the vehicle’s backspacing, the offset of its wheels and even how wide the tires really are.

How do you measure a lift on a 4×4?

Starts here1:48How To Measure The Height of your 4×4 – Snake Racing – YouTubeYouTube

What is the easiest lift kit to install?

The easiest leveling kits to install are the strut extensions and coil spacers. For those who want to lift their rear ends, block kits are perfect.

What size lift kit do I need for 35 inch tires?

For a 35s tire, you will need a lift kit of about 3.5 to 6 inches, depending though, on your truck’s backspacing, its wheel offset and also how wide its tires are. In addition, you may need some fender trimming too, before you can accommodate such large tires.

Can I fit 37 on a 4 inch lift?

They should, if you truck was a 4X4 and you put a 4″ lift on it then 37″ tires will clear no problems.

Can I fit 37 on a 6 inch lift?

You can run a 37″ tire with a 6″ lift but keep in mind that these dimensions are a maximum build. You shouldn’t go with a larger tire size or a smaller amount of lift on your vehicle. Anything smaller will allow the tires to damage the body of your car while turning, which is never what a new truck owner wants.