Why does my plane wobble KSP?

You main problem is your landing gear. DO NOT ANGLE THEM! And also place them further apart. Angled landing gear create rotational force for whatever reason.

Why does my plane Keep flipping KSP?

If this happens in the air, though (and typically only at high-speed), it sometimes has to do with having a forward center-of-drag. If your CoD is forward of the CoM, it will make your plane unstable flying forward (but stable backward – lucky you!) and it will try to flip around.

How do you fly a helicopter in Kerbal space program?

To fly a helicopter, spin up the rotors with collective at zero, engines at maximum torque. Then increase collective until it takes off. Pitch to accelerate, slow down, or fly backwards; roll to fly sideways, yaw to spin around.

How do you use air intakes in KSP?

Basically,just take mk0 part,attach it to center peace,put air intake in front and engine in the back.

What is friction control KSP?

Friction increases wheel grip, laterally you’re less prone to fish-tailing, but more likely to flip if you take sharp turns; forward/backwards you can go up steeper inclines. Traction multiplier adjusts wheel motor power. higher means you can go up steeper inclines.

Can a plane flip backwards?

The answer is yes for a “little” bit! Unlike military fighters, commercial planes do not have the engine power for sustained inverted flight and rely on lift from the wings. Commercial airliners are only tested and certified for upright flight.” However, one Boeing aircraft has flown upside down – twice!

How do you spin the motor in KSP?

Steps

1. Place the Octagon Strut.
2. Attach the the first motor node-to-node.
3. Symmetrically-8 Radial attach basic fins to the motors.
4. Use rotational tool such that the fins are parallel to the flat end of the motors.
5. Click on offset tools.
6. Click on the rotational tool.
7. Set first motor to rotate in clockwise.