How can I use Micromax dongle in Windows 10?

Follow these steps :

1. Uninstall Micromax from your computer completely.
2. Insert the data card -> right click on the modem -> Open -> right click on modem installation – properties – compatibility – run this programm in compatibility mode for windows 7 – apply – ok.

How do I connect my dongle to Windows 10?

Connect the dongle through a USB port to your PC. If running Windows 10, it’s highly possible it will automatically set up the connection for you. In order to confirm this, click on the computer / Wi-Fi icon in the lower right area of the taskbar (systray) and check if a “Cellular” tile shows up.

How to repair Micromax data card?

Few steps to resolve the problem:

1. Uninstall the modem driver.
2. Unplug the modem the connect the modem to pc.
3. Open the my computer.
4. Open the modem drive.
5. Then you find out modem installer .exe file in it.
6. Right click on installer file.
7. Click on property then click on compatibility tab.
8. Then click on change setting for all user.

Why dongle is not working?

The dongle is correctly plugged in – the casing around your USB port may be stopping your dongle from connecting. You can also try plugging the dongle into a different USB port. Your SIM is correctly installed – your dongle won’t work if your SIM hasn’t been properly inserted.

How do I fix a dongle not connected?

If the dongle has not connected, try:

1. Removing the dongle and reinserting it.
2. Using another USB port.
3. Swap the data cable to the long double-ended cable, which supplies more power to the dongle using two USB ports.
4. Removing the USB cable and restart your computer, then plug the cable back in.

How can I use Jio 4G SIM in Micromax 3G dongle?

Steps to use Jio sim in 3G Modem Dongle

1. Insert your jio sim in Modem, Dongle.
2. Place the sim in normal sim slot.
3. Connect your dongle to Pc and Wait for the connection to establish.
4. Set the APN as Jio net.
5. That’s how you can use jio sim in modem dongle.

How can I use Wi-Fi dongle in PC?

Using a Wi-Fi dongle is simple, just plug the Wi-Fi stick into the computer or mobile phone and immediately connect to the internet. There are dongle Wi-Fi sticks for laptops as well as phone dongles, both of which function the same to provide an internet connection.

How can I activate dongle in PC?

How to use a Wireless Wi-fi dongle

1. Install the supplied software and drivers onto your computer.
2. Connect the USB dongle into a free USB port.
3. From the dongle’s software, perform a scan for all access points in the area.
4. Try to connect to the router.
5. You’ll be asked for a security key.

Why is my 3 broadband not working?

Make sure your device’s Wi-Fi setting is turned on. Double check you’re connected to the correct network (Three Broadband SSID) Reboot your hub, leave the device off for about 30 seconds and reconnect. Try to re-locate the device to get a better signal.

Why my dongle is not connecting to laptop?