How do I get a new key for SmartKey?

First, insert the functioning key and turn it ¼-turn clockwise. Then, insert and remove the SmartKey learn tool. Follow by removing the functioning key, inserting a new key, and turning it ½-turn counter-clockwise. Your lock is then successfully re-keyed.

Can you duplicate Kwikset keys?

there is no cutting of key unless you wish to duplicate the keys that come in the kit. If you have any old keys that will fit Kwikset brand, you can rekey to any key.

Can Kwikset locks be rekeyed to any key?

You can rekey all of your locks to match an existing key when the locks all have the same keyway. So it is impossible to slide a Kwikset key into a Schlage lock and a Schlage key into a Kwikset lock. These two locks cannot be rekeyed to match an existing key of the other.

Can you copy a smart key?

Pop-A-Lock® can duplicate or replace virtually every make & model of smart key. We can duplicate your vehicle key quickly and less expensive than the dealership. We can meet you wherever you are and in most cases create your smart key on the spot.

Does Kwikset SmartKey work with any key?

Answer: Each SmartKey lock can be re-keyed to any SmartKey key – if you buy two re-keying sets, you can key all of your locks to one set; if you go out of town, you can just re-key one lock in your house to a different set, then give one of those keys to your neighbor/house-sitter.

What keys work with Kwikset SmartKey?

The Kwikset SmartKey uses the standard Kwikset key blank 1-1063 and “KS” keyway.

• Axxess 66.
• ILCO 1176 or KW1.
• Silca KS1.
• Taylor 54KS.

Are all Kwikset keys the same?

A Kwikset SmartKey tool (One should’ve came with your lock, but if not, you can buy one on Amazon). The new (or rather, old) key that you want to use instead. This must be a Kwikset key, as Kwikset and Schlage keys are totally different from one another (and won’t work in each other’s locks).

How do you get a Kwikset master key?

How to Create a Master Key for a Kwikset Lock

1. Measure the five cuts on the original key and the master key using the scale on the key gauge.
2. Circle the smallest number for each cut position.
3. Subtract the cut measurements of the original keys from the master key measurements to determine the top pins.