What are minimums in aircraft?

Minimums is the lowest altitude a pilot can descend to on an instrument approach for landing as well as the minimum reported visibility required on the ground in order to begin the approach. Minimums will vary with the type of approach, terrain and obstacles (buildings, towers etc) in the immediate airport area.

What is approaching in aviation?

Approach: The phase of flight starting when an airworthy aircraft under the control of the flight crew descends below 5,000 feet AGL with the intention to conduct an approach and ending when the aircraft crosses the approach end of the landing runway (runway threshold) or at the commencement of a go around maneuver.

What does approaching minimum mean?

Approaching minimums is the decision making altitude or minimum altitude ( Generally 100 feet above the minimum altitude ). Captain callout ‘approaching minimums’ in order to decide that they will land on the runway or they will go around, that depends on the Captain.

What does minimum mean in time?

1 adj You use minimum to describe an amount which is the smallest that is possible, allowed, or required. 2 adj You use minimum to state how small an amount is. The basic needs of life are available with minimum effort…, Neil and Chris try to spend the minimum amount of time on the garden.

Where are airport takeoff minimums?

If you see a “T” within a black, upside down triangle on an FAA approach plate, the airport has non-standard takeoff minimums. You can also find a list of these airports at the beginning of the FAA’s chart packet.

What is the meaning of approaching minimums?

Approaching minimums is the decision making altitude or minimum altitude ( Generally 100 feet above the minimum altitude ). Captain callout ‘approaching minimums’ in order to decide that they will land on the runway or they will go around, that depends on the Captain. In their final approach if they are going for landing then…

What does minimums mean in aviation?

The “Minimums” callout is made at the minimum altitude, and this is the point that the Pilot Flying has to make a decision — continue or go around. His response at this point is again standardized so that the other pilot is entirely clear on the course of action. His response is usually something like “Landing” or “Continue”, or else “Go Around.”

What does approaching minimums mean on the 777-300ER?

>adopting it in its new 777-300ER. Sorry man, but you’ve got it all wrong on every count. 1) “Approaching Minimums” (normally heard on Douglas and McDonnell Douglas aircraft) is an aural warning to advise that you are within 100 feet of the Decision Height or Minimum Descent Altitude, depending on what kind of approach you are executing.

What are the different types of minimums?

There are two types of landing minimums: Straight-in landing or Circling. Straight-in landing minimums are the MDA and visibility, or DH and visibility, required for a straight-in landing on a specified runway. Circling minimums are the MDA and visibility required for the circle-to-land maneuver.