Where do you connect the ground wire on a washing machine?

There is a ground wire under the main top attached to the galvanized metal trim towards the back of the washer. The power cord is plugged into a wall outlet.

Can exposed wires cause a fire?

As many of us know, exposed wire creates a fire hazard. An aging system with worn-out insulation that leaves wires exposed is vulnerable to power surges, overheating, shorting out and encountering other elements in the wall that can cause a fire.

What does exposed wire mean?

exposed wiring is electrical wiring accessible or visible in a finished interior space.

What do you do with live wire ends?

Electrical tape is the simplest method of making electric wires safe. You also use tape on capped live electric wires as an extra precaution. Tapes can be used on loose live wires that do not fit the cap. You can simply use tape over the live wire to fit into the cap.

Does a washing machine need a ground wire?

All washing machines today require a grounded electrical connection. This washer is equipped with a power supply cord having an earthing plug. To minimize possible shock hazard, the cord must be plugged into a mating, earthing-type outlet, earthed in accordance with local codes and ordinances.

Why does my washer have a ground wire?

Ground wire acts as a safe transmitter of stored or extra energy. When an electrical system or appliance malfunctions, the circuit will trip immediately. When that happens, the grounding system moves that energy into the ground. We also wrote a more detailed article on this process.

Can copper wire be exposed?

There are many types of wires used for electrical distribution, but most wires are constructed with copper or aluminum. Exposed wires should be taken seriously. Until you are certain the wire is not live, you should treat the wire as if current is running through it.

How do you dead end electrical wires?

Instructions

1. Prepare the Bare Ends of the Wires. With the electrical wire stripper, cut off any bare ends of wire down to the wire coating to tidy them up.
2. Place Wire Nuts on the Wires.
3. Add Electrical Tape to Individual Wires.
4. Push the Wires Into the Box.
5. Add the Blank Wall Plate to the Box.