Can I use 13A fuse in 6A?

No. You must use a 5A fuse. Using A 13A fuse is a fire risk. The fuse is there to protect the adapter in case of a fault.

What size MCB do I need for sockets?

For a radial socket circuit, the size of MCB used should be no more than 16 amps. This will ensure that if the circuit is overloaded, the breaker will trip before the wiring itself gets so hot that it melts and possibly catches fire.

What cable do I need for 13 amp sockets?

When used in Ring Circuits, each circuit can be used in a floor area of 100 sq. meters with a number of 13A Switched Socket outlets [13A receptacles] connected to a 32A rated MCB using 2.5 mm2 cables for L,N and E.

Can a 13A fuse go in a 3A plug?

The plugs are marked as such because they can handle a maximum of 13A of current. It is a mistake for people to assume that a 13A fuse should be used in this appliance. The 13A fuse is on the plug. The power rating is so low that we can quickly see that the fuse is too high and needs to be changed to a 3A one.

What size MCB for a double socket?

to do it properly, a socket circuit would usually be a ring of 2.5mm cable. Ie two cables into the mcb, and normally this would be protected by a 32a MCB, which basically stops the cable being overloaded by too much current being used.

What is 6A socket?

High Power (Socket) :These sockets are available in 16A. 6/16A and 25A ratings. They are used for connecting geysers, AC, Room heaters , Kitchen appliances and water pumps. Use them with suitable rating switches , motor starters or mini MCB.

What is difference between 16A and 6A?

all need to use 16A sockets. These home appliances have special sockets, such as cooker switch socket, rice cooker socket and oven switch socket, etc. The more common computers, televisions and refrigerators in the home can use 6A sockets. The PC controlled power outlet uses a 6A socket.