Can you apply Osmo oil with a brush?

With no need for thinning (Osmo Polyx Oil is supplied ready to use) all you need to do is stir the pot well and you can begin application. Apply the oil with a firm and fine bristle brush, dip it into the paint being careful not to overfill it and then brush it evenly along the wood grain.

Can you apply Osmo oil with a roller?

Roller Application Surface must be clean and dry, apply along the wood grain and spread well. For first application, two coats is recommended onto a clean and dry surface. For re-application, just one coat is sufficient.

Do you need to sand before applying Osmo?

Sanding is not necessary between coats. However, de-nibbing with a pad may help to reduce any imperfections from the surface between each coat.

Can you use Osmo polyx oil outside?

Quick drying version of Osmo Polyx oil used to complete projects that require a quick turnaround. An oil and wax based biocide-free wood preservative for interior and exterior use and ideal for high moisture environments.

How long does Osmo polyx take to dry?

Osmo Polyx®-Oil 2K (6125) has a special curing time of 4 hours, which means the floor can be used as normal after this time.

How do you clean brushes after using Osmo polyx oil?

• Clean your brushes in white spirit White spirit is a very effective cleaner for brushes used to apply oil based finishes. Use hot and soapy water afterwards to thoroughly clean your brushes.

Do you sand between coats of Osmo polyx?

Between coats I scuff-sand with a very fine abrasive pad. You can also use very fine sandpaper, 320 grit or above. After the finish has cured, I use a clean cloth to give it a thorough buffing out.

How do you remove Osmo polyx oil?

Yes, over-application of wood oil can be easily remedied by dampening a clean, lint free cloth in white spirit and wiping off the excess oil. Take care not to use too much white spirit and wipe in the direction of the wood grain. This will break down and remove the surplus oil from the surface of the wood.

Can you sand Osmo oil?

It’s durable, easy to apply, and easy to repair. The secret to success with this oil is filling the pores first. Start the surface prep by sanding up to at least 220 grit.

Can you polish Osmo polyx?

Leave to dry 8-10 hours, ventilate well. When thoroughly dry, surface can be buffed or polished with hand polisher or buffing machine.