How far can 18 gauge wire carry 24 volts?

451 feet
Using the chart, if you are using a device that requires up to 417mA of power, you can run 18 gauge wire up to 451 feet.

What size breaker do I need for a 24 volt trolling motor?

All 12, 24 and 36 volt trolling motor systems (Minn Kota 70lb thrust motors should use a 50 amp breaker).

How many amps does a 24 volt trolling motor draw?

The Force trolling motor can run on 24 volts or 36 volts, and the chart below shows how a 24v setting will draw higher amps then running at 36 volts….24 Volt Power Source.

Throttle Level	Thrust	Current
10\%	25 N-m (6 lbf)	2 A
20\%	45 N-m (10 lbf)	3 A
30\%	70 N-m (16 lbf)	6 A
40\%	101 N-m (23 lbf)	9 A

What diameter is 24 AWG wire?

Breaking Force for Copper Wire

AWG gauge	Conductor Diameter Inches	Ohms per 1000 ft.
23	0.0226	20.36
24	0.0201	25.67
25	0.0179	32.37
26	0.0159	40.81

How long will a 24v trolling motor run?

This will give you maximum speed and power and is often necessary on a large boat, or in strong winds. Thus, if you operate your trolling motor at maximum speed, you will typically get about 2 hours of use from a fully charged pair of “average” batteries. Possibly 4 hours of use for the larger extra capacity batteries.

What gauge wire is on a trolling motor?

Many trolling motors can be used with 8 gauge wire, however, the length of wire you need and the amperage of your motor can alter the size of wire you need. For example, if you need a longer length of wire, you’ll likely need a lower gauge and therefore thicker wire.

What is 24 AWG wire used for?

The large diameter of AWG24 patch cables allows for an active conductor which is an advantage when routing via machines and other pieces of equipment, or when pulled on during installation. The wire diameter of a 24AWG network cable is 0.0201 inches, while the wire diameter of a 28AWG network cable is 0.0126 inches.