Which is better thru axle or quick release?

1. Thru axles are safer- This is probably the biggest benefit for the average cyclist. Thru axles improve safety by making it nearly impossible for the front wheel to come out of the dropouts while you’re moving. The dropouts can’t lift off of the axles vertically because they have holes instead of a u-shaped slots.

How do I choose the right axle?

For a front thru-axle, this is measured from the inside to inside of your fork. For a rear thru-axle, this is measured from the inside to inside of your frame at the drop-outs. The O.L.D. measurement is listed for many thru-axles, but isn’t necessary if you know the overall length.

Do you grease through axles?

Although it is not required, it is recommended that you apply a light amount of grease to your Mountain Bike axles. You can apply it to the threads, and also on the base of the axles themselves. This not only makes them easier to install and remove, it also helps prevent rust and corrosion.

Can you convert QR to thru axle?

You can use through bolts (which can be quick release) in QR dropouts. These require specific hubs that allow for a 9mm front through bolt and a 10mm rear through bolt. On most Shimano hubs (and some similar Formula type hubs) you can replace QR axles with solid axles and use axle nuts on each end.

Are thru axles better than QR?

The end result is a stiffer front end and the elimination of brake rub. Plus, by adding a camming mechanism (like the QR lever) you can still remove your wheel quickly. Thru axles are safer and improve bike performance. It’s no wonder that the QR skewer is quickly disappearing from competition level MTBs.

Are all bike axles the same?

But things like dropout design, thread pitch and the overall length of the axle differ between makes, even with the same axle spacing, so thru-axles are not always cross-compatible between brands.