How do I get my record to spin?

Follow these steps if the turntable platter doesn’t spin:

1. Make sure that the turntable is connected to the wall outlet.
2. Move the lever on the motor drive gear inward to allow the platter to spin.
3. Place the drive belt over the notched guide on the motor pulley.
4. Re-sync the tone arm with the platter.

Is it bad to leave records on the turntable?

Leaving your records out Ideally, the only time your record should be out of its sleeve is when you’re playing the record. Any extended time outside the sleeve — be it left on the platter, or worse still, on a side table — will subject the record to dust and significantly increase the risk of damaging the surface….

Why is my Crosley turntable not spinning?

My Turntable Will Not Spin Make sure the function switch located on the front left of the device is set to phono. Then try moving the turntable arm to the right until you hear a click. Make sure the protective needle cover is removed.

Why is my record not playing?

A common reason your records may skip is dust and dirt that gets into the grooves. While it may occur on old records due to storage, paper sleeves or dust in the environment, new records may also have dust or dirt. You want to remove any dust or dirt from the record before playing it to prevent skipping.

When should I replace my turntable belt?

On average, belts should be replaced around 3-5 years. Another indication that your belt is failing is a slow start-up or if the platter appears to be spinning too rapidly. A certain belt thickness and tension were considered when designing the belt system.

How do you clean a record player?

How best to clean your turntable:

1. Use a clean, lint-free cloth for cleaning. Start in the middle and always wipe outwards.
2. Stubborn stains such as fingerprints can be tackled with alcohol.
3. Then rub the surface again with a dry, antistatic cloth.