How do you bypass the lock on a Maytag washer?
Table of Contents
How do you bypass the lock on a Maytag washer?
How to unlock Maytag washer door? If there are no errors with the washer and no components are faulty, you can try and cancel the wash cycle, press and keep holding the CYCLE END or CANCEL button and wait a few minutes and the door should unlock on its own.
Will washer work without lid lock?
NO. The lid lock it to prevent injury to the people near the washer, as without it stopping the machine, the agitator will turn with the lid open.
How do I reset my Maytag washer lock?
Door Locked at the end of the Cycle If the washer will not unlock at the end of a wash cycle, unplug the washer or disconnect power. Wait approximately 2 minutes for control to reset. Reconnect power to washer (plug in). Run a “Drain and Spin” cycle.
How do I fix the lid lock on my Maytag Bravos washer?
- Turn off the Washer and unplug the appliance.
- Locate the retaining tabs and/or screws that hold the top horizontal panel down.
- Look for the Lid Lock SWITCH on the underside of the top panel and where it fits into the appliance.
- Put the Lid back down and plug the Washing Machine back into the electrical outlet.
Can you bypass a washing machine lid switch?
Most washing machines come equipped with a lid switch. This switch is connected to a solenoid that completes a circuit, allowing the machine to run only if the top is down. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid.
Where is the lid switch on my Maytag washer?
Lift the lid of the washer to release the old lid switch. I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side.
Why is my Maytag washer lid not locking?
Common solutions for: Maytag Washer door or lid won’t lock If the door lock is defective, the washer door will not latch properly. The door latch assembly might be defective. Inspect the door latch for damage. If the door latch is damaged, replace it.
Why is my washing machine not unlocking?
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.