What causes the traction light to come on and stay on?

In some cases, the warning light can come on because wheel-speed sensors are covered with road grime or debris. When the traction control warning light stays on, that means you aren’t getting any help from the system to control traction and the system needs to be checked.

Why does my Impala says service StabiliTrak?

The “Service StabiliTrak Warning” indicates the system is not responding or operating as it should. A failed brake switch will also disable the system as well as the wrong size of tire. The cost of replacing the Impala’s wheel sensor averages $100-$120 in parts and labor.

How do I reset my StabiliTrak light?

How To Reset Service Stabilitrak Light

1. Step 1: Turn the handwheel clockwise. (If it shuts off, the vehicle does not need service, otherwise, follow the other steps.)
2. Step 2: Turn off the vehicle.
3. Step 3: Wait 15 seconds.
4. Step 4: Turn the vehicle on.

Can I drive my car with the StabiliTrak light on?

Is it Safe to Drive with the TCS Light On? It is only safe to drive with the TCS light on if it appears when you are losing traction: it means the system is engaging. Driving without traction control can make your vehicle susceptible to spinning out and sliding around on the road.

What does traction control mean on a Chevy Impala?

If You see the TC light on Your Chevrolet Impala, it means that the traction control system has been activated. When this happens, power to Your engine is being limited when the system has detected the drive is losing some control of the car.

How do you reset the ABS light on a Nissan?

How to Reset an Anti-Lock Brake Light

1. Disconnect the positive cable from the car battery, and then hold down on the brake pedal to drain the car’s electrical system. This will reset the car’s central computer.
2. Change the ABS sensor if the light comes back on.