What do I need for a keg party?

While a keg party is pretty easy to put together, there are a few important steps to take that will help make your event a success. All you need is a keg, some keg-tapping experience, and a place to host – you’ll be having a great party in no time!

How long before a party should you tap a keg?

1 to 2 hours
Do not agitate the keg. If there has been excessive agitation during transportation, allow the keg to settle for 1 to 2 hours before tapping. Make sure the beer faucet is in the off position prior to tapping.

How do you do kegs properly?

Seat the party pump on top of the keg, making sure not to push down on the spring-loaded ball valve (another way to spray beer in your face). Lock the pump onto the keg by rotating it clockwise, then engage the tap by pulling the handle out then pushing it down, or by twisting the flanges.

How do you use a keg party pump?

Party Keg Pump Use:

1. Connect the party pump (tap the keg). Insert the coupler into the keg valve and depress the handle.
2. Before pumping, open faucet releasing natural keg pressure. First beers may consist of foam.
3. Pour beer by squeezing the black faucet open completely.
4. Only pump to maintain a good beer flow.

What size garbage can do I need for a keg?

Yes, 32 gallon is a perfect fit with a keg and 3 big bags of ice.

How do you calm a foamy keg?

Tips for Reducing Kegerator Foam

1. Step 1: Temperature should be mid-low 40’s F (liquid temp, not air temp).
2. Step 2: Clean the beer line or replace.
3. Step 3: Beer line should be 3/16″ diameter.
4. Step 4: Use beer line that is 8 feet long.
5. Step 5: Set regulator in the 5-10 PSI range.

How do you pop a keg?

Step-by-Step Pictures

1. STEP 1: Lift the handle of the tap to “disengage” it.
2. STEP 2: Line up the bottom of the tap with the mouth of the keg.
3. STEP 3: Turn the tap clockwise until you feel resistance. No need to crank on it, just make sure it’s snug.
4. STEP 4: Push down on the handle to tap the keg.

How do you keep a keg cold at a party?

The cheapest way to keep a keg cold is by placing it in a suitable container and covering it with ice. Place the keg in the tub, surround it with ice and then top up with cold water. You can then either connect a pressure regulator and beer lines or fit a picnic tap directly to the keg.