What is the total resistance if three resistance of 4 ohm 6 ohm and 8 ohm are connected in parallel?

Minimum resistance is obtained by connecting all three resistances in parallel => 1/R =1/4+1/6+1/8 =>1/R = 6/24+4/24+3/24 => 1/R = 13/24 => R =24/13 ohm . Hope it helps you.

What is the current If 4 ohm and 6 ohm resistors connected in series and 6v potential difference is applied?

therefore, I = V/R = 6/4 = 1.5A which is total current.

Are distance of 6 ohm is connected in series with another resistance of 4 ohm?

A resistance of 6 ohms is connected in series with another resistance of 4 ohms. A potential difference of 20 volts is applied across the combination. Thus, the potential difference across the 6 ohm resistance is 12 volts.

How do you find the potential difference across a resistor in parallel?

In parallel circuits, the electric potential difference across each resistor (ΔV) is the same. The current in a resistor follows Ohm’s law: I = ΔV / R. Since the ΔV is the same for each resistor, the current will be smallest where the resistance is greatest.

What is the total resistance if resistance of 4 ohm and 6 ohm are connected in parallel?

Hence , Total resistance for series combination is 10Ω

How can we connect 3 4 ohm resistors so that their effective resistance is 6 Ohm?

one series and two parallel.

When 2 ohm and 4 ohm resistors are connected in series .which will differ in these resistors?

In series combination of resistor, the current through both the resistor are same but potential difference across each will be different. In parallel combination current across each resistor will be different but the potential difference will be same. The correct option is B.

When 6v is applied across the ends of a resistor for 2seconds 24 J of energy produces then what will be the current through it?

So, current through circuit is 2 amperes.

What will be the current through 6 ohm resistor in the circuit shown below?

So the current through the 6 Ω resistor is 0.44 A. The potential difference across the 12 Ω resistance can be obtained by using the equation, V = IR.

What will be the equivalent resistance where two resistance of 3 ohm and 6 ohm are connected in parallel combination?

2 ohms
Calculate the equivalent resistance when two resistances of 3 ohms and 6 ohms are connected in parallel. Thus, the equivalent resistance is 2 ohms.

When resistors are connected in parallel current?

Each resistor in parallel has the same full voltage of the source applied to it, but divide the total current amongst them. This is exemplified by connecting two light bulbs in a parallel circuit with a 1.5V battery.

Can 2 ohm resistors of 4ohms and 6 ohms be connected in parallel?

2 resistors of 4ohms and 6 ohms are connected in parallel. The combination is connected across 6V battery of negligible resistance. Calculate (a) the current through battery (b) the current through each resistor. – Studyrankersonline Physics chap electricity

What is the potential difference between two resistors in parallel?

For resistance in the parallel ,voltage across each resistor is same and total current is sum of current through each resistor. Potential difference across each resistance remains same in parallel . Then use Ohm”s law. In your opinion, what would be the average initial startup cost for product development?

How do you find the voltage of a circuit with 3 resistors?

Once you have the current, calculate voltage for the individual resistors by multiplying the current by the resistance. For example, in a series circuit with 3 resistors of 2, 3 and 5 Ohms, and a voltage of 12 volts, the current would be 12 divided by 10, or 1.2 amperes.

What is the voltage of a circuit with two parallel wires?

Each parallel wire has the same voltage as the entire circuit. Let’s say a circuit with two parallel resistors is powered by a 6 volt battery. The voltage across the left resistor is 6 volts, and the voltage across the right resistor is 6 volts. It doesn’t even matter how much resistance there is.