Which resistor is used in Tesla coil?

Construction and Testing of 9V Mini Tesla Coil: I dint not have a 22K resistor or anything near, so I used two 47K resistors in parallel as shown in the circuit.

Can I use a larger resistor?

The cases where using a higher value resistor will damage a circuit exist, but are a bit less usual than the cases where it may simply produce a weaker result than desired, or a different frequency response than desired.

Does it matter what resistor you use?

Summary. For most standard circuits, you don’t need to worry about the types of resistors you choose. All you need to worry about is the resistance value and how much power it can take.

Can we use any resistor in Tesla coil?

Originally Answered: Can I use 2.2k resistor in 9 v Tesla coil? Yes , you can definitely use . The role of Base Resistor are : In an electronic circuit, the basic function of a resistor is to limit the current to a safe value so that the associated sophisticated parts can function properly.

What happens if the resistor is too high?

The higher the resistance, the lower the current flow. If abnormally high, one possible cause (among many) could be damaged conductors due to burning or corrosion. All conductors give off some degree of heat, so overheating is an issue often associated with resistance.

What happens if I use the wrong resistor?

If the circuit with the resistor is designed correctly the resistor will be able to handle the power in consumes or turns into heat. It can last decades. However, if the design is on the edge or not a good one then the resistor can be damaged and eventually fail and worse case open.

How many watt resistor do I need?

The power that the circuit would be delivering to the motor is: Here, a 2 watt resistor would be suitable for the circuit. A lower power rated resistor such as a 0.25W, 0.5W, or 1W resistor would most likely cause the circuit to smoke, since the resistor would receive more power than it could handle.

What does a 2.2 K resistor look like?

Thus, for 2.2k ohm resistor, 1st digit is ‘ 2 ‘, ∴ look for color in a chart with value 2, then it’s your 1st color(say red). The next 2nd digit is ‘ 2 ‘, ∴ look for color in a chart with value 2, then it’s your 2nd color (say red). The last bands in 4/5 th bands resistors shows the tolerance value of the resistor.