How can you connect two different LANS together?

What you would need to do is connect all 4 PC to network A, and then via a separate network adapter also connect them to network B. You could, connect via wireless to one and via Ethernet to the other. Then all computers can share other devices on both networks.

Can you have more than one gateway on a network?

No, it can’t have more than one active default gateway. Any operating system can have multiple default gateways configured (technically a route to the unspecified address, i.e. 0.0.

How do I separate networks from one router?

To create a VLAN, which often operate within a subnet, you’ll typically find the LAN >> VLAN configuration options within your router. You’ll select the LAN subnet, select which ports on your router should be dedicated to the VLAN, enable VLAN tags and set IDs for each.

Can we connect two LANs with the switch?

Why don’t we use a switch between two LANs or two networks? – Quora. All the ports on a switch are part of the same subnet. To pass packets correctly between different subnets you need a device that correctly forward the packets on to the correct network.

Does a hub connect two different LANs?

A hub connects two different LANs. (Hub: Used as a central point of connection between media segments; like repeaters, hubs enable the network to be extended to accommodate additional workstations; commonly used in 10Base-T networks.)

How can I use two gateway in one LAN?

Setup Multiple Gateways and Multiple Internet Connections One…

1. Install iproute2.
2. Add two new routing tables.
3. Add ip routes and ip rules to the /etc/network/interfaces config file.
4. Test routing paths.

What is multiple default gateway?

Windows NT computers can be configured with multiple default gateways. This switch can occur when there are multiple gateways configured for the same network adapter or when different default gateway addresses are given on various network cards on a multihomed computer.

Can a switch be used to connect two LANs with different network IDS?

So the answer is still “no”, but the reason is a bit more subtle. Switches can carry as many subnets as you want them to because they don’t know, or care, about IP routing. It’s actually fairly common in small setups to have a router (“gateway”) with multiple IP addresses, one per subnet, on a single Ethernet port.

Can a switch be used to connect two LAN switch different network IDS?

If they operate on the same switch, you can simply setup two interfaces on the router plugged into the same switch– one for each network type, and then configure routing between them. You will probably need to separate the switch with VLANs or at least by using different subnets.

Which networking device connect one LAN to other LAN using the same protocol?

Explanation: A networking device that connects LAN to another LAN is called a “ Router”. A source router is able to communicate to other destination routers when configured right. Router use Internet Protocol (IPv4) now IPv6.