Life

How do I access my MikroTik router?

by Author

How do I access my MikroTik router?

MikroTik Router Login Open your web browser of choice and type IP address of your MikroTik router in the address bar. You can find the ip address on the back of your router. Now enter the default username and password of your router by accessing the admin panel.

What is the default IP address for MikroTik router?

192.168.88.1/24
Every router is factory pre-configured with the IP address 192.168. 88.1/24 on the ether1 port. The default username is admin with no password.

How activate MikroTik WIFI?

Click on Wireless tab and choose ap bridge from Mode dropdown menu. Put SSID name (MikroTik AP) in SSID input box. Now click on Advanced Mode button and choose your created security profile from Security Profile drop down menu. Make sure Default Authenticate and Default Forward checkbox is checked.

READ ALSO:   Does Shikamaru care about Naruto?

How do I reset my MikroTik router to factory settings?

Mikrotik Factory Reset Guide

  1. Disconnect the power cord from the unit.
  2. Hold the reset button and do not release.
  3. Plug the power cord in and wait until the ACT light starts flashing.
  4. Now release the button to clear configuration.
  5. Wait for a few minutes for the router to clear and restore the factory settings.

How do I access my MikroTik hex router?

To access the router enter address 192.168. 88.1 in your browser. Main RouterOS page will be shown as in the screen shot below. Click on WebFig from the list.

How do I reset my MikroTik router?

How do I put a password on my MikroTik router?

Passwords for wireless interfaces on Mikrotiks are stored under Wireless > Security Profiles. By default, all wireless interfaces will share the same security key /preshared key / password. Just double-click on the security profile name you want to edit, enter the new password, then press ‘Ok’.

READ ALSO:   How do I create a project using HTML and CSS?

How do I find the IP address of my MikroTik router?

All MikroTik routers are preconfigured with the following IP address, as well as default username and password:

  1. IP address: 192.168. 88.1/24 (ether1 port)
  2. Username: admin.
  3. Password: (none)

How do I access MikroTik access point?

Access Point Configuration

  1. Connect to the router via Winbox.
  2. Setup Wireless interface, necessary configuration options are mode=ap-bridge band=ap_operated_band frequency=ap_operated_frequency ssid=network_identification.