How do I change the rollers on my HP printer?

Cover the print cartridge with a sheet of paper. Find the pickup roller. Release the small, white tabs on either side of the pickup roller, and then rotate the pickup roller toward the front of the product. Gently pull the pickup roller up, and then out.

How do I change the roller on my printer?

Replacing the Tray One Pickup Roller

1. Remove the front accessory cover.
2. Locate the printer pickup roller at the center of the tray.
3. Release the roller by pressing the clips on each side of the roller simultaneously.
4. Slide new paper pick up roller into place until it clicks.
5. Replace front accessory plate.

How do you remove the roller from a printer?

Cover the print cartridge with a sheet of paper. Find the pickup roller. Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller toward the front. Gently pull the pickup roller up and out.

How do you replace paper feed rollers?

Lift the paper tray slightly, and then pull it out until it stops. Lift the front side of the tray, and then pull it out of the printer. Move the printer to the edge of a sturdy and stable table or desk. Confirm the green lock lever secures the roller correctly by checking that the new roller rotates smoothly.

Why does my printer roller not pull paper?

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.

What is a pick up roller on a printer?

pickup roller. in a printer, the roller that picks up pieces of paper from the paper tray. It usually has a soft, rubbery surface. The pickup roller should be cleaned or replaced if the printer is suffering frequent paper jams from the inability to pick up a piece of paper.