How do I fix the red light on my JBL Go?

To solve this problem, press the Power button and keep it pressed until the speaker turns off. It takes around 20 seconds. When the speaker turned off, turn it on again and from now the speaker should function correctly again.

What does red light mean on JBL?

battery
A JBL speaker blinking red indicates a low battery level. This may vary from one model to the other, but it is usually an indication that your speaker needs to be charged. The intensity and frequency of the flashing LED will be different for every JBL model.

How do you fix a JBL speaker that won’t turn on?

If your JBL speaker keeps powering on/off by itself or refuses to shut off, resetting the speaker will usually solve the issue. With the JBL Flip, you can reset it by holding the volume up and play buttons while it is powered on.

Why did my JBL stop working?

If the speaker works when it is plugged in, but does not work when it is not plugged in, the speaker may have a faulty battery. To replace the battery, please refer to the Battery Replacement Guide.

How do you know if JBL go is charging?

Red LED indicator – When you insert the micro-USB charging cable, you will see the LED indicator turning Solid Red. When it is done charging, this Red LED indicator will turn off. Red LED Blinking – When the Red LED is blinking slowly, it means the battery is empty, and you need to recharge.

How do you fix a JBL speaker that won’t charge?

You can reset the speaker on the JBL by holding down the Bluetooth and volume down buttons for 5 seconds. This works on the JBL Go and JBL Flip. To reset The JBL charge, hold the play pause and volume up buttons until you see the power button glowing.

Why is my JBL charge not turning on?

The Power Button Is Broken Plug in your charger to the speaker’s USB-C port to charge the device. Make sure the charging light on the base of the device is blinking. If it is fully charged and still not turning on, the power button may be worn out or broken. See our button replacement guide.

How do I fix my JBL speaker not charging?

A software fix may be all you need to get your speaker charging again. To reset the speaker, hold down the Bluetooth and volume button for about 5 seconds. This will work on JBL Go and JBL Flip 5. To reset your JBL charge, press and hold the play, pause, and volume up buttons together until the power button glows.

How do I reset my JBL go?

– Start by turning your JBL GO on. To do so press the Power button. – Next, press and hold the Volume + button and the Bluetooth button together for 10 seconds. – If the device turns off, turn it back on by pressing the Power button.

How do I check my JBL battery?

1. How do I check the battery level of My JBL Go 2? Simply look at the LED indicator on the front of the speaker. If it is blinking in red, then it means that the battery is low and requires charging.

How do I reset my JBL?

You can reset your speaker by pressing the volume up (the + button) and play buttons at the same time. In some other models, you need to press the volume up (the + button) and the Bluetooth buttons together, while in others, you need to press and hold the mute button.