How do I reset my Brother MFC-L5850dw?

Reset the Network Settings to the Factory Settings

1. Press [ ] [Settings]>[All Settings]>[Network]>[Network Reset].
2. [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.] appears. Press [OK] for two seconds to confirm. The machine will restart.

How do you reset the toner on a Brother MFC?

To reset the ‘Toner Life End’ / ‘Replace Toner’ message on Brother DCP, MFC and HL colour printers:

1. With the printer powered on, open the toner access door.
2. Press the ‘Clear/Back’ button to get to the ‘Reset Menu’
3. At the Reset Menu you can then scroll through the reset options for your printer’s toner cartridges.

What toner does Brother MFC-L5850dw use?

Brother TN820
Brother TN820 Laser Compatible Toner Cartridge Works with HL-L5200DW, -L6200DW, -L6250DW and MFC-L5700DW, -L5800DW, -L5850DW printers and more!

Why does my Brother printer keep saying replace toner?

Verify the toner cartridge is installed correctly. If you install a new genuine Brother toner cartridge but the “Toner Low”, “Replace Toner” or “Toner Ended” error indication remains, the toner cartridge may not be installed correctly.

How do you change a toner cartridge on a Brother printer?

Replace Toner

1. Make sure that the machine is turned on.
2. Open the front cover.
3. Remove the toner cartridge and drum unit assembly from the machine.
4. Push down the green lock lever and take the toner cartridge out of the drum unit.
5. Unpack the new toner cartridge.
6. Remove the protective cover.

How do I restore my Brother printer to factory settings?

Press the Up arrow key select Reset.

1. Press the Settings button.
2. Press All Settings.
3. Press Initial Setup.
4. Press Reset.
5. Press All Settings or Factory Reset (depends on which model you have).
6. Press Yes.
7. Press Yes again and hold for two seconds.

How do you trick a brother toner cartridge?

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your Brother toner cartridge.

How do you clear the replace toner message on a brother mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do I scan from my Brother MFC-L5850DW to my computer?

Brother MFC-L5850DW Scanner Setup Tap the ControlCenter4 icon present on the taskbar on your computer. Go to the Device Settings tab and select the Device Scan Settings button. Now the Device Scan Settings dialog box displays on the screen. Configure the scan settings.