What is the main advantage of using a boundary PZM microphone?

Advantages of PZM Microphones The main advantage of this technology is the elimination of interference from reflected sound waves. A normal microphone will pick up sound waves from the primary source and also any reverberations, which can result in unnatural sound reproduction.

When would you use a boundary microphone?

Boundary mics are used on hockey boards for body check sound effects. They are also commonly used to record full room sound, such as in a conference room, by being mounted on a wall or table.

What are floor mics used for?

A floor microphone is a boundary mic (PZM) positioned on the floor near an intended sound source. These mics are easily concealable and generally pick up sound in a hemispherical pattern. They are commonly used in sports broadcasts and theatre productions.

What is a condenser boundary mic?

A boundary microphone is essentially a small diaphragm condenser mic mounted in a housing that directs the diaphragm parallel to the surface onto which it’s mounted. The advantage of a boundary mic is that it can pick up sounds accurately in reverberant rooms and can capture sounds from multiple sources.

Where should I place my boundary mic?

Boundary mics are often mounted on the floor of a stage, a table in a conference room, or a lectern of a church or large hall.

Is a cardioid mic a condenser?

The two are not mutually exclusive, because condenser microphones are also cardioid. Dynamic mics are cardioid too! The main takeaway is this: cardioid is a polar pattern, while condenser is a type of microphone.

What is a floor mic?

It is a microphone placed on the floor of a theater stage, usually near the front edge, to pick up actors. It is also called an “area mic” because it picks up over a broad area. It’s also called a “boundary microphone” because it rests on a boundary or surface: the stage floor.

How do you mic a stage in music?

On The Floor

1. Place/move loudspeakers close to the audience and as far from the mics as possible.
2. Ride the mic faders on the mixer up and down, following the action on stage.
3. Place the mics as close to the actors as possible (without getting in their way).

Do I need a condenser mic?

Condenser microphones are best used to capture vocals and high frequencies. They are also the preferred type of microphone for most studio applications. Because of the thin diaphragm and increased sensitivity, condenser mics are often used to pick up delicate sounds. They also need a power source.