Which is better 8n or 9N Ford tractor?

This is the main difference between the 8n and 9n Ford tractors; and as you’d expect, the 8n has a number of improvements that make it better than the 9n. One such improvement comes in horsepower. The engines on the 8n tractors are generally a bit more powerful than those on 9n tractors.

What is the difference between Ford 8n 9N 2N?

The most noticeable differences between the 8N and its predecessors was the inclusion of a 4-speed transmission instead of a 3-speed in the 9N and 2N, and an increase in both PTO and drawbar horsepower. The other big change on the 8N was the addition of a ‘Position-control’ setting for the hydraulics.

What years did Ford make the 2N tractor?

Farm Tractors – Ford Model ‘2N’ This two-tone gray and red-painted, semi-streamlined tractor was built in 1946. It is an “offspring” of the Ford 9N which was produced from 1939 – 1941.

What year did Ford stop making the 9N tractor?

1946
The Ferguson-Sherman company, which made plow and tractor parts, marketed the Model 9N for sales distribution from 1939-1946. After the war, all production of the Ford Model 9N tractor was halted. In 1946, the relationship between Harry Ferguson and Ford Motor Company severed.

How much did a Ford 8N tractor cost new?

Ford 8N

Production
Manufacturer:	Ford
Factory:	Highland Park, Michigan, USA
Total built:	524,000
Original price:	$1,404 (1952 )

How do you tell a Ford 2N from a 9N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.

What Horse Power is a 2N Ford tractor?

Ford 2N

Ford 2N Power
Drawbar (claimed):	12 hp 8.9 kW
PTO (claimed):	23 hp 17.2 kW

What is the difference between a 2N and a 9N tractor?

Dimensions. The Ford 2N and 9N had similar dimensions, except for the operating weights: the 2N handled 3,070 pounds while the 9N could handle 3,375 pounds. Both tractors had an overall length of 115 inches, a width of 64 inches and a height of 52 inches. Each tractor also had a ground clearance of 13 inches.

What is a Ford 9N worth?

Some of the mint condition tractors that are older are much more expensive than later models in decent shape. A good condition Ford 9n tractor is about $3,000 if it’s a later model. A Ford 9n Tractor from the 1940’s is about $1,500. A mint condition 1939 Ford 9n tractor was going for $15,000 on the internet.

How much weight can a Ford 8N tractor lift?

The Ford 8N utilizes manual drum brakes and has a 10 gallon fuel tank. The tractor features a type 1 rear three-point hitch with a maximum lift of 800 lbs. The internally mounted hydraulic system features four pistons and a maximum pressure of 1,500 psi.

How many horsepower was a Ford 8N tractor?

Ford 8N

Ford 8N Power
Drawbar (claimed):	23.16 hp 17.3 kW
PTO (claimed):	27.32 hp 20.4 kW
Drawbar (tested):	21.95 hp 16.4 kW
PTO (tested):	23.24 hp 17.3 kW

How do I know if my Ford tractor is a 2N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.

What is the difference between a 9N and 2n Ford tractor?

Ford Tractors: Difference between a 9N, 2N, and 8N. As my hippie tractor will demonstrate, paint color can’t always be counted on. But since it is the first and most obvious clue available, you should know that 9N and 2N tractors were painted all grey, while a red and grey paint job was for 8N tractors.

What does 8N mean on a tractor?

The 8N introduced position control, which is a small up/down handle under the seat on the right side–this was an improvement to the hydraulic system. Both brake pedals are on the same side – 9N and 2N tractors were split. The serial number starts with an “8N.”

When did the Ford 2n come out?

Ford 2N First, a quick history lesson: the 9N was introduced in 1939. It was followed by the 2N in 1942, and early models were greatly impacted by wartime rationing. Once the war was over, a new and much improved 8N was introduced in 1948.

Where is the serial number on a ford 9N tractor?

The serial number for your tractor will be located on the left hand side of the engine block (when sitting on the tractor seat). 9N Fords were built from 1939 – 1943. Here is a guide to the year based on serial number: 1939 SN between 1 and 10233 1940 SN between 10234 and 45975 1941 SN between 45976 and 89887 1942 SN between 89888 and 105411