Why subwoofer is not working?
Table of Contents
Why subwoofer is not working?
Ensure the subwoofer is connected to the MIX or SUB output on the stereo system or TV. Ensure the power cord of the subwoofer is connected to a working AC outlet. IMPORTANT: Certain speaker settings may disable the subwoofer. Trying a different speaker setting may resolve the issue.
How do you reset a subwoofer?
Reset the system.
- Press the Power button to turn on the soundbar.
- Press and hold the Power button while pressing the Input button and the VOL- button (at the same time).
- When RESET appears on the front panel display, release the buttons.
- Unplug the power cord for 30 seconds.
How can you tell if a sub fuse is blown?
If the fuse is blown, the filament will be disconnected at one of it’s ends. Sometimes this is noticable, sometimes it isn’t. Look carefully and see if the ends are visible. Try tapping the fuse and quickly look to see if the filament is bobbing around like a lose wire.
Why did my bass stop working?
Most likely a bent output jack or a broken wire. If the jack is bent you lose contact – and if a wire breaks, ditto. Not difficult to fix if you know someone who can open a bass up and look at it.
Is my subwoofer working?
When testing your subwoofer, the sound should be warm, crisp, and clear. If the sound is fuzzy, or distorted in any way, it is very likely that your subwoofer is not working correctly. Typically, if there is sound coming from the subwoofer clearly, then it is working correctly.
Do subwoofers have fuses?
Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks. You would either unscrew it or pull it apart to access the fuse.
Why are my subs not getting power?
Check to make sure that cables are firmly connected and plugged into the correct spots. Check outlets, power cable, and fuse. Most subwoofers have a “standby” LED that glows to indicate active power. If it’s not lit, check that the subwoofer is securely plugged into a wall socket, surge protector, or power strip.
Where is the subwoofer fuse?
Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks.
Why is my subwoofer not working?
Cone Seal Failure. In order to produce sound,all woofers,including subwoofers,need to be able to move air at an accurate frequency.
How do you fix a subwoofer?
What you will need to fix a subwoofer: Screwdriver. Fuse. Check the connections between the subwoofer and the audio source. If the connections are fine, test the subwoofer with different speaker wire. Disassemble the subwoofer housing enough to check for a fuse. Replace the fuse in your subwoofer.
Why would a subwoofer stop working?
Reasons a Subwoofer is Not Working. Damaged cone. The usual cone movement may cause tearing of the cone materials especially if the motion is abnormal. Also, age engenders wearing; hence, it is not unusual to see scratches and cuts on the cone surface. The cone may also be detached from its surround..
How to connect a subwoofer?
Step 1. Locate the subwoofer preamplifier output. Many surround-sound home theaters and stereo receivers have an output designed for use with a