How do I fix Windows loading files?

Stuck at Windows is loading files: Fix for Windows Vista, 7

1. 2.1 Fix #1: Check your HDD and RAM.
2. 2.2 Fix #2: Reset BIOS.
3. 2.3 Fix #3: Boot into Safe Mode.
4. 2.4 Fix #4: Boot into Last Known Good Configuration.
5. 2.5 Fix #5: Disable automatic restart on system failure.
6. 2.6 Fix #6: Run Startup Repair.
7. 2.7 Fix #7: Run bootrec.

How do I stop the startup repair loop?

Fix #2: Disable Automatic Restart

1. Restart your computer.
2. Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or system information)
3. Quickly begin tapping F8 repeatedly, until you see the list of boot options.
4. Choose “Disable automatic restart on system failure”

How do I bypass startup repair?

1. In Command Prompt, type bcdedit /set {default} recoveryenabled No and press Enter.
2. Restart your PC, the Automatic Startup Repair should be disabled and you might be able to access Windows 10 again.
3. If you need to again enable it, you can type bcdedit /set {default} recoveryenabled Yes in CMD and press Enter.

How do I fix Windows 10 stuck on completing installation?

Delete all partitions If Windows 10 install gets stuck on your PC, the problem might be related to your partitions. To fix the problem, some users are suggesting to remove all partitions on your PC and then recreate them. This is a drastic solution since it will remove all your files from your hard drive.

Why does Startup Repair keep popping up?

If you stuck on computer startup repair screen, the problem is probably caused by damaged or corrupted BCD settings or corrupted boot partition.

How do I get out of boot loop in Windows 10?

If Windows 10 is still stuck in a restart loop after unplugging peripherals and performing a hard reset, you can try to bypass the restart screen using the Function (FN) key. Hold the FN key down as you power on your PC, and while still holding the key, tap the Windows key to bypass the restart.

https://www.youtube.com/watch?v=t0JPFe9jKRY