What size drill bit do I need for a M8 anchor bolt?
Table of Contents
What size drill bit do I need for a M8 anchor bolt?
14mm drill bit
Answer: Hi, The M8 Rawlbolt requires a 14mm drill bit for installation.
What size hole do you drill for a 8mm bolt?
Metric Threads
| Thread | Drill size for tapping standard metric threads | Clearance hole |
|---|---|---|
| M6 | 5 | 6.6 |
| M8 | 6.8 | 9 |
| M10 | 8.5 | 11 |
| M12 | 10.2 | 13.5 |
What size drill bit do I need for anchors?
“You want a drill bit that’s big enough to drill a hole in the wall, and easy to push the anchor in with your thumb,” Donahue explains. “You don’t want to have to force it in there. The drill bit should be the same size as the body of the anchor you’re using.”
What size drill bit do I need for an M6 anchor bolt?
12mm drill
Answer: Hi, A 12mm drill bit is required for the M6 Rawlbolt.
What size drill is M8?
Metric Threads
| Thread | Drill size for tapping standard metric threads | Drill size for tapping fine metric threads |
|---|---|---|
| M8 | 6.8 | 7 |
| M10 | 8.5 | 8.8 |
| M12 | 10.2 | 10.8 |
| M14 | 12 | 12.5 |
What size screws 6mm plug?
Screw Gauge, Metric, Size, Clearance Holes, Pilot Holes & Wall Plugs
| Gauge | Metric equiv. | Masonry plug size |
|---|---|---|
| 3 | 2.5mm | Yellow (5mm hole) |
| 4 | 3.0mm | Yellow (5mm hole) |
| 6 | 3.5mm | Red (6mm hole) |
| 8 | 4.0mm | Red (6mm hole) or Brown (7mm hole) |
What size is M8 in MM?
13 mm
Standard metric spanner and allen key sizes.
| Size | Spanner | Allen Key |
|---|---|---|
| M5 | 8 mm | 4 mm |
| M6 | 10 mm | 5 mm |
| M8 | 13 mm | 6 mm |
| M10 | 17 mm | 8 mm |
How do you predrill an anchor?
How To Put Anchors Into Walls
- Mark your hanging point with a pencil.
- Take a nail-set, awl, or nail and with a hammer tap a “pilot hole” into the wall.
- DO NOT make the hole wider than the anchor.
- Place the anchor over the hole and firmly tap it in until it’s flush with the wall.
What is a 6 mm drill bit?
6mm is 0.2362198 inches. 15/64 is 0.234 inches. That’s about as close as you can get in fractions.
What size are M6 bolts?
M6 threads are 6mm in diameter, only . 4 mm larger than 12-24 screws. When it comes to racking equipment, 12-24 threads are used with most racks, 10-32 threads are used with Dell equipment, audio rack and M6 metric threads are used with HP equipment.