How do I connect M Audio Duo?

Windows:

1. Use the included USB cable to connect the M-Track Duo to your computer.
2. In the Taskbar, locate the Volume Control “speaker” icon.
3. In the Windows Sound control panel select the Playback tab and select USB Audio Codec as the default device.
4. Click the Recording tab and select USB Audio Codec as the default device.

Can I plug my guitar amp into my interface?

You can plug a guitar amp into an audio interface provided the amp has a Line Output (or Line Out). Ideally, you must connect the guitar amp’s Line Out to the audio interface’s Line Input using a 1/4 inch TRS or TS cable. A guitar audio signal, without amplification, is known as an instrument-level signal.

How do I connect M-track solo to Pro Tools?

Use the included USB cable to connect the M-Track Solo to your computer. Open Pro Tools | First M-Audio Edition. Go to Setup > Playback Engine…. Open the Playback Engine dropdown menu and select USB Audio Codec.

Does m audio fast track have a preamp?

it has two channel mic preamps “which sound great for a little usb interface”.

How do I set up M-audio interface?

Configuring the M-Track in Logic Pro

1. Open Logic Pro and create a new session. Click the Preferences icon in the top left corner and select Audio.
2. Select the M-Track as the Output Device and the Input Device.
3. Click Apply Changes and close the window.

How do I use my amp as an audio interface?

If your amplifier does have a ‘line out’, all you’ll need to do is plug a ¼ inch jack cable into it, then connect the other end of the cable to one of the line-level inputs on your audio interface. The input may also be labeled as ‘instrument’ or ‘line/inst’.

Does an audio interface work as an amp?

So, yes. If your audio interface has a direct monitoring feature, you can use it as an amp by plugging in a speaker or headphones.

How do I set up M audio interface?

Is m-audio fast track good?

Overall, it’s tough to fault the M-Audio Fast Track in its current incarnation. It won’t stand up to more expensive interface in sound quality, but it sounds damn good for $150, and works with both Macs and PCs. And with the bundled version of Pro Tools SE, you can get started recording music immediately.

What is AM Audio Fast Track?

The Fast Track from M-Audio is a USB audio interface for both Mac and Windows computers. Several gigabytes of audio loops are also included, so you can start composing and experimenting right away. The Fast Track has a dedicated guitar input, so you can plug in and get optimum sound quality directly into your computer.

Does the M-Audio m-track have a high-pitched sound?

I have an M-Audio M-Track, a $100 USB-based audio interface. Across all 3 computers I have tried it on, there is a high-pitched whine around 1kHz, similar to the one here: https://dl.dropboxusercontent.com/u/7345145/noise_2.wav

What is the M-Audio m-track 2×2 and 2x2m?

With the M-Audio M-Track 2X2 and 2X2M, you can create flawless 24-bit/192kHz studio-quality recordings with an intuitive and easy-to-use audio interface. If you’re a beginner, or even a pro, there may be a point where things aren’t working as you’d expect and you could use some help.

What can I do with m-track duo?

Throw it into your bag, grab a laptop, and create your next podcast, song, or mix, anywhere you want! M-Track Duo offers zero-latency monitoring of the mic, line or instrument input signal through both the main stereo 1/4/’ outputs and stereo1/4” headphone output.

What is an M-Audio audio interface?

M-Audio audio interfaces are right at home in the middle of all these, where they translate signals from analog to digital and back again so your entire setup can work together. And since M-Audio makes an interface for just about every kind of use, it’s easy to find the right one for your needs.