How do you know what handles to put on cabinets?

When it comes to installing cabinet door handles (either knobs or pulls), they are always placed on the opposite side from the door hinges. You’ll specifically want to place them anywhere between 1” and 4” from the top or bottom edge of the door.

What size handles to use on kitchen cabinets?

Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.

What are the most popular handles for kitchen cabinets?

Top 16 Most Popular Kitchen Cabinet Knobs and Pulls

• Mushroom Cabinet Knobs (Brushed Satin Nickel)
• Center to Center Bar Pull (Stainless Steel)
• Arendal Cup Pull (Oil Rubbed Bronze)
• Black Marble & Polished Nickel Knob.
• Princetonian Bar Pull (Brushed Satin Nickel)
• Clarity Clear Glass Knob.

Should kitchen handles be vertical or horizontal?

The universal rule is that handles are placed vertically on doors and horizontally on pull-out drawers. Stand in your new kitchen and hold your handles against the drawers and cabinet doors to try out different heights and positions for each of them.

What size should cabinet pulls be?

There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.

Should cabinet pulls all be the same size?

Consistent Size Throughout There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably.

Where do pulls go on Shaker cabinets?

Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.

Should you put knobs or pulls on kitchen cabinets?

There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.

Do cabinet hardware and faucet have to match?

Does cabinet hardware have to match your faucet? No. But, traditionally kitchens and bathrooms will match hardware finishes to the faucet to tie the finishes in the room together. Matching cabinet hardware to your faucet creates a cohesive look.

Does cabinet hardware need to match appliances?

Your kitchen cabinet hardware doesn’t have to match your appliances, but it should complement them. As long as the hardware you choose has a similar color or undertone to your appliances, it will look good, so make sure to keep that in mind while shopping.

How do you put handles on cabinet doors?

Use a drill bit that is the same size as the screws being used with the knob or pull. Drill from the front of the cabinet toward the back. Hold the drill level and drill very slowly, without a lot of pressure placed on the cabinet. This will keep the drill from splintering the back of the door as it pushes through.

Where do you put handles on kitchen cabinets?

The cabinet knobs for kitchen base cabinets are placed somewhere between 2.5 and 3 inches down from the upper corner opposite the hinge side of the door. When knobs are placed in these locations, you will discover that your hand comfortably can grab them without your arm stretching.

How to choose the right cabinet materials?

How to Choose the Right Kitchen Cabinet Materials for Your Project Cores. The most important part of kitchen cabinetry is the structure of the cabinet itself. Medium Density Fiberboard (MDF) Image Credit – addicted2decorating.com MDF is one of the most widely used cores, both in custom cabinetry as well as manufactured cabinetry. Hardwood Plywood. Flexible Plywood. Faces. Solid Wood. Veneer.

How to install cabinet handles?

Insert the fastening screw (s) through the backside of the hole.