How do you reset the oil life on a 2017 Chevy Equinox?

To reset Your oil light You will need to put the car in the on position with the engine off. From there press the DIC menu button on the dash. Press up until You see oil life on the screen. Press and hold the SET/CLR button until You see it reacH100\%.

How do I turn off my oil change notification?

Hold the Reset Button and Turn the Key

1. Press and hold the reset button.
2. Turn the ignition back to the ON position while holding the reset button.
3. Watch the oil change or maintenance light carefully.
4. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

How do you reset the oil life on a Chevy Equinox?

2010-2017 Models

1. Turn the key in the ignition to the “On/Run” position with the engine off.
2. Press the “Menu” button for the Vehicle Information Menu.
3. Press “Up“. The remaining oil life will be displayed.
4. Press and hold the “SET/CLR” button until 100\% is displayed.
5. Turn the ignition off.

Why does my car says change oil when I just changed it?

If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.

Why is my change oil light on when I just changed my oil?

The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.

How do you reset the oil life on a Chevy Equinox 2020?

CHEVY EQUINOX OIL LIFE RESET

1. Turn The Ignition to ON Position. Don’t Start the Engine.
2. Press The Menu Button, Then Use Up And Down Arrow To Navigate The Remaining Oil Life.
3. While The Oil Life Is Displayed. Press The Set/Clr Button.
4. Afer You Press Set/Clr Button.
5. After You Select Yes.
6. Turn Ignition Off.

How do you reset the oil life on a Chevy Equinox 2021?

Equinox Base Level Display

1. Turn on your car. If your vehicle has an ignition button, hold down the Start/Stop button for 5 seconds without step on the brake pedal.
2. Go to the VEHICLE tab menu.
3. Find the OIL LIFE.
4. Hold down the ✓ button.
5. Select YES.

How do you turn off the change oil light on a Chevy Equinox?

How to Reset the Oil Indicator on a Chevrolet Equinox

1. Insert the key into the ignition.
2. Turn the key to the run position, but do not start the vehicle.
3. Press and release the gas pedal three times within three seconds of turning the key.
4. Observe as the oil change light begins to flash.

How do you reset the oil change light on a Chevy Equinox?

Do you have to reset oil light after oil change?

Do not reset the oil light unless you have actually changed the oil. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine.