How much transmission fluid does a 2013 Jeep Wrangler take?
Table of Contents
- 1 How much transmission fluid does a 2013 Jeep Wrangler take?
- 2 How much transmission fluid does a 2009 Jeep Wrangler take?
- 3 How many quarts does a Jeep Wrangler take?
- 4 How much transmission fluid does a 2014 Jeep Wrangler take?
- 5 How many quarts does a Dana 44 take?
- 6 Does Jeep recommend transmission flush?
- 7 How much differential fluid do I need Jeep Wrangler?
- 8 How many quarts does a Dana 35 take?
How much transmission fluid does a 2013 Jeep Wrangler take?
A 2013 Jeep Wrangler Unlimited transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.
How much transmission fluid does a 2009 Jeep Wrangler take?
For Automatic Transmission: 42RLE….AP4
| Notes: | Mopar ATF+4 P/N 05013457AA |
|---|---|
| Capacity: | 4 speed 42RLE Total Fill 8.8 quarts 4 quarts Initial Fill |
What type of transmission fluid does a Jeep Wrangler take?
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No. VV324)
How many quarts does a Jeep Wrangler take?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.9 quarts. . . . (with filter)After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How much transmission fluid does a 2014 Jeep Wrangler take?
A 2014 Jeep Wrangler Unlimited transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.
How many quarts are in a Dana 30?
Jeep Wrangler Differential Fluid Capacity Chart
| Jeep Wrangler JL Differential Fluid Capacity | |
|---|---|
| Axle: 186 – Front Axle Non Rubicon | Capacity: 1.82 Pints |
| Axle: Dana 30 Axle | Capacity: 1.3 Quarts / 1.2 Liters |
| Axle: Dana 35 Axle | Capacity: 1.8 Quarts / 1.7 Liters |
| Axle: Dana 44 Axle | Capacity: 2.0 Quarts / 1.9 Liters |
How many quarts does a Dana 44 take?
Front Dana 44 differential needs 2.7 pints (1.35 quarts) and the rear needs 4.75 pints (2.375 quarts). If you have factory covers, all you need to do is fill up your differentials until gear oil oozes out of the fill hole.
Does Jeep recommend transmission flush?
Still, most owner’s manuals will recommend changing the transmission fluid every 90,000 miles or so. Flushing your transmission’s fluid has fallen out of vogue in recent years because the high-pressure cleaning involved may dislodge debris inside the transmission that can literally gum up the works.
How much transmission fluid does a 2016 Jeep Wrangler take?
A 2016 Jeep Wrangler transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.
How much differential fluid do I need Jeep Wrangler?
How many quarts does a Dana 35 take?
Jeep Wrangler TJ Fluid Capacities
| Component | Quantity | Fluid Type |
|---|---|---|
| 42RLE 4-Speed Automatic | 4 Quarts for Pan Drop / 8.8 Quarts for Dry Fill | ATF 4 |
| Dana 30 Axle | 1.3 Quarts / 1.2 Liters | 80w-90* |
| Dana 35 Axle | 1.8 Quarts / 1.7 Liters | |
| Dana 44 Axle | 2.0 Quarts / 1.9 Liters |